----- Original Message ----- From: "Martin Galpin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 25, 2003 5:12 PM Subject: [speedtouch] Re: Further info : Alcatel Speedtouch 330 USB/ Linux kernel 2.4.20, speedbundle 1.0, gcc 3.3
> > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > No, your line type is one of : > > - a classical analogic line (pots: plain old telephon system) and use ADSL > > ANSI/G.dtm annex A > > - a numeric line (isdn: integrated services numeric line) and use ADSL > > ANSI/G.dtm annex B ( and UR2 for Germany). > > Over this line, depending of your ISP, you should use one or various > > protocols (PPPoA/PPPoE, routed_IP, bridged_IP) > > > > Under the windows diagnostic program, you will see your modem type under > > ADSL pots/rnis (mine is french rnis=>isdn) > > > > Maybe there is an unsupported change in this new firmware in the manner the > > firmware is encapsulated in the file. > > In this V3.0 driver, it is visible that the firmware is no more inside of > > alcaudsl.sys (the file is too small) but in KDxx2.eni../ZZxx2.eni. > > > > Does your REV400 work under windows? > > > > Did you try with speedmgmt instead of modem_run? > > I apoligise, my line type is POSTS in Gdmt.A mode. Does it work under windows? How identify the modem under windows diagnostic program (pots or isdn)? > > Well, I was beginning to think they have made a change internally somewhere. > > Do you think there's going to be much luck until one of the developers comes > across one? Edouard Gomez look to be a teacher, so he is on holidays at this time. I am afraid you have to wait some of the guru come back. If you don't want to wait and have some C skill, you have to find some post in archives where it is explaind how the firmware is encapsulated in the firmware file. It's may have somewhere in CVS a .c programm to explore those things if I remember well. It's may be http://cvs.sourceforge.net/viewcvs.py/*checkout*/speedtouch/speedtouch/Attic /extract.c?content-type=text%2Fplain&rev=1.3 Later you have to identify what have changed and accomodate modem_run to thoses changes. Because it does not indicate 100%, this is a sign that one of the start or end sequence to detect exact firmware position in the file has changed. I know just one thing, I don't have the skill to do that yet. Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
