Hello again, I'm having problems making this modem work with pppoe. After loading the firmware into the modem and check if everything is ok in /proc/net/atm/devices and /proc/net/atm/speedtch\:0, I run the following command: br2684ctl -b -c 0 -a 0.0.35 which creates the interface successfully. The problem is when I try to run pppoeconf or even configure the nas0 interface with ifconfig, I get a kernel panic with the following errors: Attempt to release alive socket or Attempt to release alive packet
My configuration is as follows: - Debian sarge with debian kernel 2.6.3-1-k7 (also tried with a custom 2.6.4 and 2.4.25 kernel with the same results) - speedtch, pppoe and br2684 kernel modules loaded - silver speedtouch 330 (modem_run says it's revision 0200) - KQD6P1 + KQD6P2 firmware - the ZZZLP1 + ZZZLP2 doesn't work, which may be the problem, I guess. Can anyone help me on this problem? Also, I would like to know if there is a way to use pppoe without using the kernel module, because, without the kernel module, I don't have an ATM device, so I can't run br2684ctl. Thanks in advance and best regards. Ricardo Seabra Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
