> > > Jul 6 18:08:53 linda kernel: speedtouch.c: udsl_atm_close: deallocating > > > vcc 0xce3ec1e0 with vpi 0 vci 38 > > > Jul 6 18:08:53 linda kernel: speedtouch.c: udsl_cancel_send entered > > > Jul 6 18:08:53 linda kernel: speedtouch.c: udsl_cancel_send done > > > Jul 6 18:08:53 linda kernel: speedtouch.c: udsl_atm_close successful > > > Jul 6 18:09:09 linda kernel: speedtouch.c: udsl_extract_cells: unknown > > > vpi/vci (0/38)! > > > Jul 6 18:09:37 linda last message repeated 55 times > > > > This means that your ISP is still sending you packets. But the socket > > has been closed, so it doesn't know about 0/38 any more. > > > Are the cells send or receive?
Receive. > Is-it not a buffer which is sending the cells to the driver or some > remaining ip traffic wich try to go out when the door is closed? No, packets trying to go out give a different message. > I too have disconnection mostly between 19-21 hours. > I suppose it is related when one computer in my home network is running. It > is one XP computer with no peers at all. > I suspect the upload traffic goes up to a certain limit and then the > connection hang. It is not so easy to see because my graphic had a 5 mn > interval, so I miss the upper limit. > > I did not have disconnection with bewan usb driver during 4 days (appart the > daily after 24h), so I suppose the ISP is not the guiltly. It may not be a > very reliable test because network condition (inside and out) may vary so > much. Ciao, Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
