Gilles Espinasse wrote: > Selon Alexandre LISSY <[EMAIL PROTECTED]>: > > >>Here we go :) >> >>it has been working for some days, and then, starting to bug again. logs >>aren't full of verbosity, but i just dunno what to give to you. > > > There is diffrent problem : > primary: > - the 'kernel: usb-uhci.c: interrupt, status 3, frame# 34' > Unknow cause, wich firmware are you using? > which firmware did you mean, the one for the SpeedTouch ? > secondly : > modem_run is run 3 times but this is a hot-plug problem with 2.4 kernel, a new > variable exist on 2.6 kernel, allowing to load only with the firt interface. > i know, i've talked about it with benoit on the IRC channel. > third : > the script don't wait that the modem is ready to start pppd > As I am not using hot-plug nor the standard script, I can't help more. > > Wich 2.4 kernel are you using? 2.4.27, compiled by myself, on a debian woody :) > > Increase modem_run verbosity may help. This is not a problem as modem_run is > silent after the sync is gained. > > > > Gilles > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] benoit has gave me this link, in which i've found my case : http://www.mail-archive.com/speedtouch%40ml.free.fr/msg06407.html
"- under some circonstance, the mutex stay in memory and still indicate that the firmware has been loaded.... where it is not." Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
