hi! first thanks for your reply. my pppd options are: lock defaultroute noipdefault noauth passive asyncmap 0persist lcp-echo-interval 2 lcp-echo-failure 7 name [EMAIL PROTECTED] user [EMAIL PROTECTED]
plugin /usr/lib/pppd/plugins/pppoatm.so 8.48 i use kernel 2.4.18 with speedtouch-patch and compiled with no module support because i dont need any.when i start pppd i get after plugin init and SUCCESS 8.48 but nothing happens then and no ppp0 device is there when i type ifconfig...i dont want dial on demand, it should stay persistent tia Gernot ----- Original Message ----- From: "Gilles Espinasse" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 09, 2005 9:19 PM Subject: [speedtouch] Re: pppd ? > > > ----- Original Message ----- > From: "Gernot" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, February 09, 2005 9:11 PM > Subject: [speedtouch] pppd ? > > >> >> Hi! >> >> I've problems connecting to my ISP using pppd with my alcatel speedtouch > USB. >> I compiled all the necessary options into the kernel like ppp over atm >> and > asynchronous transfer mode and I also use a ppp (2.4.3) that supports atm. >> The pppoatm.so plugin is also there, but when i start ppp it just prints > plugin init and connect 8.48 (which is my vci/vpi pair) >> >> but i get no ip or a default gateway ... the options are also correct and > chap and pap-secrets are also ok. >> >> does anybody know what i can do? >> > Did you attempt to use dial on demand? > In this case, wich libpcap version did you use? > It will not work with libpcap-0.8.3 due to the change from DLT_PPP to > DLT_PPPWITHDIRECTION > > What pppd options are you using? > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : > mailto:[EMAIL PROTECTED] > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
