I am afraid I had not fully understood the hotplugging scenario. You will probably find the answer you want from http://linux-hotplug.sourceforge.net. Good luck Bonzo
>Hello > >I'm trying to get the hotplug firmware load to work but I keep getting the >following error: > > > >kerner: usb 1-1: Product: Speed Touch USB > >kerner: usb 1-1: Manufacturer: ALCATEL > >kerner: usb 1-1: SerialNumber: 0090D0147978 > >kerner: usb 1-1: khubd timed out on ep0in > >kerner: usb 1-1: found stage 1 firmware speedtch-1.bin > >kerner: usb 1-1: found stage 2 firmware speedtch-2.bin > >kerner: usb 1-1: firmware/speedt timed out on ep5out > >kerner: usb 1-1: USB disconnect, address 5 > > > >I tried both with latest firmware download from www.speedtouch.com ><http://www.speedtouch.com/> and with my current mgmt.o firmware split with >firmware_extractor (this last one is a known good firmware - If I load the >firmware with speedmgm, then the modem works fine). > >This is a SUSE9.2 with kernel 2.6.11-rc4 and the speedtouch is the >oldest/original green one. > > > >Do you have any idea? > > > >Thanks > >Livio > > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
