Hi Michele,
> I've done ping on that destination IP as you suggested but the answer was
> fatally
>
> "Network is unreachable"...as i expected!!!
A common problem people have is that their connection is fine, but they
have no DNS. Pinging an ip address checks that.
> May 30 14:33:34 localhost kernel: usb 2-1: USB disconnect, address 2
> May 30 14:33:39 localhost kernel: usb 2-1: new full speed USB device using
> address 4
> May 30 14:33:40 localhost kernel: usb 2-1: control timeout on ep0in
> May 30 14:33:41 localhost kernel: usb 2-1: found stage 1 firmware
> speedtch-1.bin
> May 30 14:33:42 localhost kernel: usb 2-1: found stage 2 firmware
> speedtch-2.bin
> May 30 14:33:44 localhost kernel: usb 2-1: bulk timeout on ep5out
Looks good.
> May 30 14:33:57 localhost hald[3144]: Timed out waiting for hotplug event
> 336. Rebasing to 337
I don't know what this ^^^ message means.
Can you please do:
cat /proc/net/atm/speed*
and
/sbin/route -n
Also, please run pppd with the debug option:
pppd call whatever_you_usually_have debug
That should write some more stuff to your system logs.
Thanks,
D.
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
