Hi Duncan!
Here goes my new iteration. 
I have just done the step one, because the "ADSL line is up" was not
anywhere in /var/log/messages.

However, the messages:
 found stage 1 firmware speedtch-1.bin
 found stage 2 firmware speedtch-2.bin
were there, after the message "New full speed usb device using ohci_hcd
address 4"

Should I follow your next steps??

Thank you again, friend! And guess?
Waiting again your feedback!
See ya!
Herva



> 
> OK, here they are.  You will need to be the superuser (root).
> 
> (1) plug in your modem (or unplug it then plug it in again).
> Watch the lights on it - what do they do?  Now check the end
> of your system logs (probably /var/log/messages).  Do you
> see messages something like this:
> 
> found stage 1 firmware speedtch-1.bin
> found stage 2 firmware speedtch-2.bin
> 
> followed a bit later by a message saying
> 
> ADSL line is up
> 
> and giving line speeds?
> 
> (2) Copy and paste this into a text editor then save it as
> /etc/ppp/peers/speedtch
> 
> lcp-echo-interval 10
> lcp-echo-failure 3
> noipdefault
> defaultroute
> user '[EMAIL PROTECTED]'
> noauth
> noaccomp
> nopcomp
> noccp
> novj
> holdoff 4
> persist
> maxfail 25
> updetach
> usepeerdns
> plugin rp-pppoe.so
> nas0
> 
> Change [EMAIL PROTECTED] for the username your ISP knows you by. Often (but 
> not
> always) it has an @isp bit at the end.
> 
> (3) Do the following:
> 
>       cat /proc/net/atm/speed*
> 
> What is the output?
> 
> (4) Do the following:
> 
>       br2684ctl -b -c 0 -a VP.VC
> 
> Change VP.VC for the VPI/VCI numbers for your country/ISP. For example in
> Portugal it's 0.35
> You may need to specify the path to br2684ctl (probably it is in /usr/sbin
> or someplace like
> that).
> 
> Did you get an error message?  Now do:
> 
>       /sbin/ifconfig nas0 192.168.0.1 netmask 255.255.255.0
> 
> Did you get an error message?  Now try
> 
>       /usr/sbin/pppd call speedtch debug
> 
> Error message?  Also, check your system logs, since pppd may dump info
> there?
> 
> (5) If all went well so far, try
> 
>       ping 68.142.226.37
> 
> If that works, then things are looking good.
> 
> Ciao,
> 
> D.
> 
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se désinscrire : mailto:speedtouch-
> [EMAIL PROTECTED]
> 
>  


        
        
                
_______________________________________________________ 
Yahoo! Acesso Grátis - Internet rápida e grátis. 
Instale o discador agora! http://br.acesso.yahoo.com/
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]

        

Reply via email to