Hi, I tried to install the Linux Kernel SpeedTouch driver for Ubuntu Hoary Hedgehog. I've got a revision 2 modem (the purple one). I followed the instructions from the document The Linux Kernel SpeedTouch driver for Ubuntu Hoary Hedgehog, but I cannot get online. First: I am a newby as far as linux is concerned, but I do know how to copy and paste and that is what I did from this doc.... 1. The doc. says: "use the firmware-extractor to split it into two parts, speedtch-1.bin and speedtch-2.bin" --> Question: do I have to rename KQD6_3.012 and ZZL_3.012 to those names after extraction or what? 2. Under lemma SECRETS it says: to create a textfile with the following line (adjusted of course according to the registered username/password with my ISP): '[EMAIL PROTECTED]' * 'password'. ---> Question: do I have to use the quotes or do I have to leave them out. ---> Question: Do I have to use a space before and after the asterisk (*). 3. After creating the bootscript (textfile called dial) I run the following three lines. sudo install -m 744 dial /etc/init.d && sudo ln -s ../init.d/dial /etc/rc2.d/S95dial && sudo ln -s ppp/resolv.conf /etc/resolv.conf The doc. says I should be online now after a reboot, but no way... 4. In the reference table it says for the Netherlands: PPPoA(?),( indeed with a question mark), so I followed this line. --->Question: Would it do any harm to follow the PPPoE line in the rebound?
General question: in case I did something wrong is there a way to 'uninstall' this whole thing and make a fresh start? If yes what is the syntax? Hope to hear from someone soon. Greetz, Georges Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
