Hola Alejandro, muchas gracias por tu ayuda, te detallo los pasos que he llevado a cabo...
1.-Reinstalar el ubuntu 5.04; para eliminar cosas que se pudieran haber instalado de manera accidental 2.-Realizar todos los pasos del tutorial el resultado...nada de nada, sigo igual yo creo qu el problema viene por el dichoso br2684, por lo que veo... [EMAIL PROTECTED]:/etc/ppp/peers # md5sum /usr/sbin/br2684ctl f7a0883ddafff7dabedd9409e118f835 /usr/sbin/br2684ctl [EMAIL PROTECTED]:/etc/ppp/peers # modprobe ppp-generic [EMAIL PROTECTED]:/etc/ppp/peers # modprobe pppoatm [EMAIL PROTECTED]:/etc/ppp/peers # modprobe br2684 [EMAIL PROTECTED]:/etc/ppp/peers # br2684ctl -b -c 0 -a 8.32 bash: /usr/sbin/br2684ctl: cannot execute binary file [EMAIL PROTECTED]:/etc/ppp/peers # pppd call speedtch Plugin rp-pppoe.so loaded. RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 pppd: In file /etc/ppp/peers/speedtch: unrecognized option 'nas0' [EMAIL PROTECTED]:/etc/ppp/peers # ls /usr/sbin/br* -l -rwxr-xr-x 1 root root 13821 2006-01-27 22:06 /usr/sbin/br2684ctl [EMAIL PROTECTED]:/etc/ppp/peers # y yo creo que el firmware está ok: [EMAIL PROTECTED]:/lib/hotplug/firmware # ls speed* -l -rw-r--r-- 1 root root 935 2006-01-27 21:57 speedtch-1.bin -rw-r--r-- 1 root root 775545 2006-01-27 21:57 speedtch-2.bin aunque en el log veo algo de un error devuelto por el modem: Jan 27 22:35:34 localhost syslogd 1.4.1#16ubuntu6: restart. Jan 27 22:35:34 localhost kernel: Inspecting /boot/System.map-2.6.10-5-386 Jan 27 22:35:34 localhost kernel: Loaded 27514 symbols from /boot/System.map-2.6.10-5-386. Jan 27 22:35:34 localhost kernel: Symbols match kernel version 2.6.10. Jan 27 22:35:34 localhost kernel: No module symbols loaded - kernel modules not enabled. Jan 27 22:35:34 localhost kernel: 0000000000a0000 (reserved) Jan 27 22:35:34 localhost kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Jan 27 22:35:34 localhost kernel: BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) Jan 27 22:35:34 localhost kernel: BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data) Jan 27 22:35:34 localhost kernel: BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS) Jan 27 22:35:34 localhost kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) Jan 27 22:35:34 localhost kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) Jan 27 22:35:34 localhost kernel: Warning only 896MB will be used. Jan 27 22:35:34 localhost kernel: Use a HIGHMEM enabled kernel. Jan 27 22:35:34 localhost kernel: 896MB LOWMEM available. Jan 27 22:35:34 localhost kernel: found SMP MP-table at 000ff780 Jan 27 22:35:34 localhost kernel: DMI 2.3 present. Jan 27 22:35:34 localhost kernel: ACPI: PM-Timer IO Port: 0x808 Jan 27 22:35:34 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Jan 27 22:35:34 localhost kernel: Processor #0 15:4 APIC version 20 Jan 27 22:35:34 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Jan 27 22:35:34 localhost kernel: Processor #1 15:4 APIC version 20 Jan 27 22:35:34 localhost kernel: WARNING: NR_CPUS limit of 1 reached. Processor ignored. Jan 27 22:35:34 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Jan 27 22:35:34 localhost kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Jan 27 22:35:34 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jan 27 22:35:34 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Jan 27 22:35:34 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jan 27 22:35:34 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Jan 27 22:35:34 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Jan 27 22:35:34 localhost kernel: Using ACPI (MADT) for SMP configuration information Jan 27 22:35:34 localhost kernel: Built 1 zonelists Jan 27 22:35:34 localhost kernel: Kernel command line: root=/dev/sda3 ro quiet splash Jan 27 22:35:34 localhost kernel: Initializing CPU#0 Jan 27 22:35:34 localhost kernel: PID hash table entries: 4096 (order: 12, 65536 bytes) Jan 27 22:35:34 localhost kernel: Detected 3213.117 MHz processor. Jan 27 22:35:34 localhost kernel: Using pmtmr for high-res timesource Jan 27 22:35:34 localhost kernel: Console: colour VGA+ 80x25 Jan 27 22:35:34 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jan 27 22:35:34 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 27 22:35:34 localhost kernel: Memory: 901916k/917504k available (1436k kernel code, 15016k reserved, 754k data, 224k init, 0k highmem) Jan 27 22:35:34 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Jan 27 22:35:34 localhost kernel: Security Framework v1.0.0 initialized Jan 27 22:35:34 localhost kernel: SELinux: Disabled at boot. Jan 27 22:35:34 localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jan 27 22:35:34 localhost kernel: monitor/mwait feature present. Jan 27 22:35:34 localhost kernel: using mwait in idle threads. Jan 27 22:35:34 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K Jan 27 22:35:34 localhost kernel: CPU: L2 cache: 2048K Jan 27 22:35:34 localhost kernel: CPU: Intel® Pentium® 4 CPU 3.20GHz stepping 03 Jan 27 22:35:34 localhost kernel: Enabling fast FPU save and restore... done. Jan 27 22:35:34 localhost kernel: Enabling unmasked SIMD FPU exception support... done. Jan 27 22:35:34 localhost kernel: Checking 'hlt' instruction... OK. Jan 27 22:35:34 localhost kernel: Checking for popad bug... OK. Jan 27 22:35:34 localhost kernel: ACPI: Looking for DSDT in initrd... not found! Jan 27 22:35:34 localhost kernel: ENABLING IO-APIC IRQs Jan 27 22:35:34 localhost kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 Jan 27 22:35:34 localhost kernel: checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd Jan 27 22:35:34 localhost kernel: Freeing initrd memory: 4336k freed Jan 27 22:35:34 localhost kernel: NET: Registered protocol family 16 Jan 27 22:35:34 localhost kernel: EISA bus registered Jan 27 22:35:34 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4 Jan 27 22:35:34 localhost kernel: PCI: Using MMCONFIG Jan 27 22:35:34 localhost kernel: mtrr: v2.0 (20020519) Jan 27 22:35:34 localhost kernel: ACPI: Subsystem revision 20050211 Jan 27 22:35:34 localhost kernel: ACPI: Interpreter enabled Jan 27 22:35:34 localhost kernel: ACPI: Using IOAPIC for interrupt routing Jan 27 22:35:34 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Jan 27 22:35:34 localhost kernel: PCI: Probing PCI hardware (bus 00) Jan 27 22:35:34 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Jan 27 22:35:34 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0 Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Jan 27 22:35:34 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Jan 27 22:35:34 localhost kernel: Linux Plug and Play Support v0.97 © Adam Belay Jan 27 22:35:34 localhost kernel: pnp: PnP ACPI init Jan 27 22:35:34 localhost kernel: pnp: PnP ACPI: found 15 devices Jan 27 22:35:34 localhost kernel: PnPBIOS: Disabled by ACPI PNP Jan 27 22:35:34 localhost kernel: PCI: Using ACPI for IRQ routing Jan 27 22:35:34 localhost kernel: ** PCI interrupts are no longer routed automatically. If this Jan 27 22:35:34 localhost kernel: ** causes a device to stop working, it is probably because the Jan 27 22:35:34 localhost kernel: ** driver failed to call pci_enable_device(). As a temporary Jan 27 22:35:34 localhost kernel: ** workaround, the "pci=routeirq" argument restores the old Jan 27 22:35:34 localhost kernel: ** behavior. If this argument makes the device work again, Jan 27 22:35:34 localhost kernel: ** please email the output of "lspci" to [EMAIL PROTECTED] Jan 27 22:35:34 localhost kernel: ** so I can fix the driver. Jan 27 22:35:34 localhost kernel: pnp: 00:07: ioport range 0x290-0x297 has been reserved Jan 27 22:35:34 localhost kernel: audit: initializing netlink socket (disabled) Jan 27 22:35:34 localhost kernel: VFS: Disk quotas dquot_6.5.1 Jan 27 22:35:34 localhost kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 27 22:35:34 localhost kernel: devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) Jan 27 22:35:34 localhost kernel: devfs: boot_options: 0x0 Jan 27 22:35:34 localhost kernel: Initializing Cryptographic API Jan 27 22:35:34 localhost kernel: isapnp: Scanning for PnP cards... Jan 27 22:35:34 localhost kernel: isapnp: No Plug & Play device found Jan 27 22:35:34 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 27 22:35:34 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 27 22:35:34 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled Jan 27 22:35:34 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 27 22:35:34 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 27 22:35:34 localhost kernel: io scheduler noop registered Jan 27 22:35:34 localhost kernel: io scheduler anticipatory registered Jan 27 22:35:34 localhost kernel: io scheduler deadline registered Jan 27 22:35:34 localhost kernel: io scheduler cfq registered Jan 27 22:35:34 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Jan 27 22:35:34 localhost kernel: EISA: Probing bus 0 at eisa0 Jan 27 22:35:34 localhost kernel: Cannot allocate resource for EISA slot 8 Jan 27 22:35:34 localhost kernel: EISA: Detected 0 cards. Jan 27 22:35:34 localhost kernel: NET: Registered protocol family 2 Jan 27 22:35:34 localhost kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes Jan 27 22:35:34 localhost kernel: TCP: Hash tables configured (established 262144 bind 65536) Jan 27 22:35:34 localhost kernel: NET: Registered protocol family 8 Jan 27 22:35:34 localhost kernel: NET: Registered protocol family 20 Jan 27 22:35:34 localhost kernel: Restarting tasks...<6> Strange, kswapd0 not stopped Jan 27 22:35:34 localhost kernel: Strange, kseriod not stopped Jan 27 22:35:34 localhost kernel: done Jan 27 22:35:34 localhost kernel: ACPI wakeup devices: Jan 27 22:35:34 localhost kernel: P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 UAR1 USB1 USB2 USB3 USB4 EUSB MC97 Jan 27 22:35:34 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5) Jan 27 22:35:34 localhost kernel: RAMDISK: cramfs filesystem found at block 0 Jan 27 22:35:34 localhost kernel: RAMDISK: Loading 4336KiB [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^Hdone. Jan 27 22:35:34 localhost kernel: VFS: Mounted root (cramfs filesystem) readonly. Jan 27 22:35:34 localhost kernel: Freeing unused kernel memory: 224k freed Jan 27 22:35:34 localhost kernel: ACPI: Processor [CPU1] (supports 8 throttling states) Jan 27 22:35:34 localhost kernel: NET: Registered protocol family 1 Jan 27 22:35:34 localhost kernel: SCSI subsystem initialized Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Jan 27 22:35:34 localhost kernel: ata1: SATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 19 Jan 27 22:35:34 localhost kernel: ata2: SATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 19 Jan 27 22:35:34 localhost kernel: ata1: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48 Jan 27 22:35:34 localhost kernel: ata1: dev 0 configured for UDMA/133 Jan 27 22:35:34 localhost kernel: scsi0 : ata_piix Jan 27 22:35:34 localhost kernel: ATA: abnormal status 0x7F on port 0xA007 Jan 27 22:35:34 localhost kernel: scsi1 : ata_piix Jan 27 22:35:34 localhost kernel: elevator: using anticipatory as default io scheduler Jan 27 22:35:34 localhost kernel: Vendor: ATA Model: Maxtor 6L160M0 Rev: BACE Jan 27 22:35:34 localhost kernel: Type: Direct-Access ANSI SCSI revision: 05 Jan 27 22:35:34 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 27 22:35:34 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 27 22:35:34 localhost kernel: usbcore: registered new driver usbfs Jan 27 22:35:34 localhost kernel: usbcore: registered new driver hub Jan 27 22:35:34 localhost kernel: Initializing USB Mass Storage driver... Jan 27 22:35:34 localhost kernel: usbcore: registered new driver usb-storage Jan 27 22:35:34 localhost kernel: USB Mass Storage support registered. Jan 27 22:35:34 localhost kernel: SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) Jan 27 22:35:34 localhost kernel: SCSI device sda: drive cache: write back Jan 27 22:35:34 localhost kernel: SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB) Jan 27 22:35:34 localhost kernel: SCSI device sda: drive cache: write back Jan 27 22:35:34 localhost kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > p3 p4 Jan 27 22:35:34 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Jan 27 22:35:34 localhost kernel: Stopping tasks: ===| Jan 27 22:35:34 localhost kernel: Freeing memory... ^H-^H\^H|^H/^Hdone (471 pages freed) Jan 27 22:35:34 localhost kernel: Restarting tasks... done Jan 27 22:35:34 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 27 22:35:34 localhost kernel: kjournald starting. Commit interval 5 seconds Jan 27 22:35:34 localhost kernel: Adding 714852k swap on /dev/sda8. Priority:-1 extents:1 Jan 27 22:35:34 localhost kernel: EXT3 FS on sda3, internal journal Jan 27 22:35:34 localhost kernel: hda: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive Jan 27 22:35:34 localhost kernel: hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive Jan 27 22:35:34 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 27 22:35:34 localhost kernel: hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Jan 27 22:35:34 localhost kernel: Uniform CD-ROM driver Revision: 3.20 Jan 27 22:35:34 localhost kernel: hdb: ATAPI 52X DVD-ROM drive, 256kB Cache Jan 27 22:35:34 localhost kernel: parport: PnPBIOS parport detected. Jan 27 22:35:34 localhost kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Jan 27 22:35:34 localhost kernel: lp0: using parport0 (interrupt-driven). Jan 27 22:35:34 localhost kernel: mice: PS/2 mouse device common for all mice Jan 27 22:35:34 localhost kernel: Capability LSM initialized Jan 27 22:35:34 localhost kernel: device-mapper: 4.3.0-ioctl (2004-09-30) initialised: [EMAIL PROTECTED] Jan 27 22:35:34 localhost kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jan 27 22:35:34 localhost kernel: cdrom: open failed. Jan 27 22:35:34 localhost kernel: cdrom: open failed. Jan 27 22:35:34 localhost kernel: kjournald starting. Commit interval 5 seconds Jan 27 22:35:34 localhost kernel: EXT3 FS on sda4, internal journal Jan 27 22:35:34 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode. Jan 27 22:35:34 localhost kernel: Real Time Clock Driver v1.12 Jan 27 22:35:34 localhost kernel: input: PC Speaker Jan 27 22:35:34 localhost kernel: inserting floppy driver for 2.6.10-5-386 Jan 27 22:35:34 localhost kernel: Floppy drive(s): fd0 is 1.44M Jan 27 22:35:34 localhost kernel: FDC 0 is a post-1991 82077 Jan 27 22:35:34 localhost kernel: Linux agpgart interface v0.100 © Dave Jones Jan 27 22:35:34 localhost kernel: agpgart: Detected an Intel 915G Chipset. Jan 27 22:35:34 localhost kernel: agpgart: Maximum main memory to use for agp memory: 816M Jan 27 22:35:34 localhost kernel: agpgart: AGP aperture is 256M @ 0x0 Jan 27 22:35:34 localhost kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 Jan 27 22:35:34 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 27 22:35:34 localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jan 27 22:35:34 localhost kernel: USB Universal Host Controller Interface driver v2.2 Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x8000 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Jan 27 22:35:34 localhost kernel: hub 1-0:1.0: USB hub found Jan 27 22:35:34 localhost kernel: hub 1-0:1.0: 2 ports detected Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x8400 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Jan 27 22:35:34 localhost kernel: hub 2-0:1.0: USB hub found Jan 27 22:35:34 localhost kernel: hub 2-0:1.0: 2 ports detected Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x8800 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Jan 27 22:35:34 localhost kernel: hub 3-0:1.0: USB hub found Jan 27 22:35:34 localhost kernel: hub 3-0:1.0: 2 ports detected Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.3: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 Jan 27 22:35:34 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x9000 Jan 27 22:35:34 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 Jan 27 22:35:34 localhost kernel: hub 4-0:1.0: USB hub found Jan 27 22:35:34 localhost kernel: hub 4-0:1.0: 2 ports detected Jan 27 22:35:34 localhost kernel: usb 2-1: new low speed USB device using uhci_hcd and address 2 Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Jan 27 22:35:34 localhost kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller Jan 27 22:35:34 localhost kernel: ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xcfdffc00 Jan 27 22:35:34 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 Jan 27 22:35:34 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 Jan 27 22:35:34 localhost kernel: speedtch: probe of 1-2:1.1 failed with error -12 Jan 27 22:35:34 localhost kernel: usbcore: registered new driver speedtch Jan 27 22:35:34 localhost kernel: hub 5-0:1.0: USB hub found Jan 27 22:35:34 localhost kernel: hub 5-0:1.0: 8 ports detected Jan 27 22:35:34 localhost kernel: hw_random hardware driver 1.0.0 loaded Jan 27 22:35:34 localhost kernel: ICH6: IDE controller at PCI slot 0000:00:1f.1 Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 Jan 27 22:35:34 localhost kernel: ICH6: chipset revision 3 Jan 27 22:35:34 localhost kernel: ICH6: not 100%% native mode: will probe irqs later Jan 27 22:35:34 localhost kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcio, hddio Jan 27 22:35:34 localhost kernel: usb 5-5: new high speed USB device using ehci_hcd and address 4 Jan 27 22:35:34 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Jan 27 22:35:34 localhost kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 Jan 27 22:35:34 localhost kernel: eth%%d: -- ERROR -- Jan 27 22:35:34 localhost kernel: usb 5-6: new high speed USB device using ehci_hcd and address 5 Jan 27 22:35:34 localhost kernel: scsi3 : SCSI emulation for USB Mass Storage devices Jan 27 22:35:34 localhost kernel: usb 1-2: USB disconnect, address 2 Jan 27 22:35:34 localhost kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3 Jan 27 22:35:34 localhost kernel: usb 1-2: khubd timed out on ep0in Jan 27 22:35:34 localhost kernel: usb 1-2: found stage 1 firmware speedtch-1.bin Jan 27 22:35:34 localhost kernel: usb 1-2: found stage 2 firmware speedtch-2.bin Jan 27 22:35:34 localhost kernel: usb 2-1: new low speed USB device using uhci_hcd and address 3 Jan 27 22:35:34 localhost kernel: usbcore: registered new driver hiddev Jan 27 22:35:34 localhost kernel: input: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.1-1 Jan 27 22:35:34 localhost kernel: input,hiddev96: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:1d.1-1 Jan 27 22:35:34 localhost kernel: usbcore: registered new driver usbhid Jan 27 22:35:34 localhost kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Jan 27 22:35:34 localhost kernel: ts: Compaq touchscreen protocol output Jan 27 22:35:35 localhost kernel: Vendor: Generic Model: STORAGE DEVICE Rev: 9317 Jan 27 22:35:35 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 27 22:35:35 localhost kernel: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0 Jan 27 22:35:35 localhost kernel: Vendor: Generic Model: STORAGE DEVICE Rev: 9317 Jan 27 22:35:35 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 27 22:35:35 localhost kernel: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 1 Jan 27 22:35:35 localhost kernel: Vendor: Generic Model: STORAGE DEVICE Rev: 9317 Jan 27 22:35:35 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 27 22:35:35 localhost kernel: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 2 Jan 27 22:35:35 localhost kernel: Vendor: Generic Model: STORAGE DEVICE Rev: 9317 Jan 27 22:35:35 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 27 22:35:35 localhost kernel: Attached scsi removable disk sde at scsi2, channel 0, id 0, lun 3 Jan 27 22:35:35 localhost scsi.agent[6941]: sd_mod: loaded sucessfully Jan 27 22:35:35 localhost scsi.agent[6953]: sd_mod: loaded sucessfully Jan 27 22:35:35 localhost scsi.agent[6965]: sd_mod: loaded sucessfully Jan 27 22:35:35 localhost scsi.agent[6977]: sd_mod: loaded sucessfully Jan 27 22:35:35 localhost kernel: Vendor: Generic Model: USB Flash Disk Rev: 0.00 Jan 27 22:35:35 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Jan 27 22:35:35 localhost kernel: SCSI device sdf: 512000 512-byte hdwr sectors (262 MB) Jan 27 22:35:35 localhost kernel: sdf: Write Protect is off Jan 27 22:35:35 localhost kernel: SCSI device sdf: 512000 512-byte hdwr sectors (262 MB) Jan 27 22:35:35 localhost kernel: sdf: Write Protect is off Jan 27 22:35:35 localhost kernel: /dev/scsi/host3/bus0/target0/lun0: p1 Jan 27 22:35:35 localhost kernel: Attached scsi removable disk sdf at scsi3, channel 0, id 0, lun 0 Jan 27 22:35:35 localhost scsi.agent[7173]: sd_mod: loaded sucessfully Jan 27 22:35:35 localhost kernel: ACPI: Power Button (FF) [PWRF] Jan 27 22:35:36 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Jan 27 22:35:36 localhost kernel: apm: overridden by ACPI. Jan 27 22:35:36 localhost kernel: ADSL line is synchronising Jan 27 22:35:37 localhost hal.hotplug[3588]: timout(10000 ms) waiting for /bus/pci/slots Jan 27 22:35:37 localhost pci.agent[7612]: Bad PCI agent invocation Jan 27 22:35:37 localhost kernel: drivers/usb/input/hid-input.c: event field not found Jan 27 22:35:37 localhost kernel: drivers/usb/input/hid-input.c: event field not found Jan 27 22:35:38 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:38 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:38 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:38 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:38 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:38 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:38 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:38 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:38 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California Jan 27 22:35:38 localhost kernel: PPP generic driver version 2.4.2 Jan 27 22:35:39 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:39 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:41 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:41 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:43 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:43 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:45 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:45 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:47 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:47 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:49 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:49 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:51 localhost gconfd (root-8179): comenzando (versión 2.10.0), pid 8179 usuario «root» Jan 27 22:35:51 localhost gconfd (root-8179): Se resolvió la dirección «xml:readonly:/etc/gconf/gconf.xml.mandatory» a una fuente de configuración de sólo lectura en la posición 0 Jan 27 22:35:51 localhost gconfd (root-8179): Se resolvió la dirección «xml:readwrite:/root/.gconf» a una fuente de configuración escribible en la posición 1 Jan 27 22:35:51 localhost gconfd (root-8179): Se resolvió la dirección «xml:readonly:/etc/gconf/gconf.xml.defaults» a una fuente de configuración de sólo lectura en la posición 2 Jan 27 22:35:51 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:51 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:51 localhost kernel: NET: Registered protocol family 10 Jan 27 22:35:51 localhost kernel: Disabled Privacy Extensions on device c02f0500(lo) Jan 27 22:35:51 localhost kernel: IPv6 over IPv4 tunneling driver Jan 27 22:35:53 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:53 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:55 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:55 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:57 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:57 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:35:59 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:35:59 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:36:01 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:36:01 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:36:02 localhost gconfd (root-8179): Se resolvió la dirección «xml:readwrite:/root/.gconf» a una fuente de configuración escribible en la posición 0 Jan 27 22:36:02 localhost kernel: SCSI error: host 3 id 0 lun 0 return code = 8000002 Jan 27 22:36:02 localhost kernel: ^ISense class 7, sense error 0, extended sense 0 Jan 27 22:36:16 localhost kernel: ADSL line is up (1024 Kib/s down | 320 Kib/s up) Jan 27 22:36:30 localhost pppd[8523]: Plugin rp-pppoe.so loaded. Jan 27 22:36:30 localhost pppd[8523]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 Jan 27 22:36:30 localhost kernel: NET: Registered protocol family 17 Alguna idea, please? Por que no funciona lo del binario? Gracias >From: Alejandro Ariel Abaca <[EMAIL PROTECTED]> >Reply-To: [email protected] >To: [email protected] >Subject: [speedtouch] Re: speedtouch ubuntu problems >Date: Fri, 27 Jan 2006 10:39:47 -0300 > > >Rafael: > >Te cuento que pude hacer andar el modem dentro del Fedora Core 4 al final. >Lo que hice fue seguir al pie de la letra el procedimiento que indicaban en >la página, y solito salió andando. Pudiste verificar si el modem arranca >(esto es, si las luces del modem primero titilan y luego quedan quietas en >verde) ? > >Por favor, indicame el procedimiento que seguiste a ver si te puedo dar una >mano con algo. > >Saludos desde el otro lado del Atlántico. > >Alejandro Ariel Abaca >Moreno 604, Dpto. 1 - B >(8000) - Bahía Blanca >(0291)-155-024246 >(0291)-454-4783 >[EMAIL PROTECTED] >[EMAIL PROTECTED] >[EMAIL PROTECTED] >----- Original Message ----- >From: "Rafael Flores" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Thursday, January 26, 2006 5:33 PM >Subject: [speedtouch] Re: speedtouch ubuntu problems > > > > > > Hi, > > thanks for your help... > > Yes, I have installed libatm and gcc and I thonk that te firmware is the > > correct one, my modem is the revision 4 so the firmware I've installed >is > > ZZZL_3.012. > > I have also checked VP and VC and looks correct, are 8 and 32, for terra >in > > Spain. > > I have typed also the next command, with the next ressult: > > > > root@:~ # ping www.terra.es /*después del reinicio sigo sin conexión*/ > > ping: unknown host www.terra.es > > root@:~ # modprobe ppp-generic > > root@:~ # modprobe pppoatm > > root@:~ # modprobe br2684 > > root@:~ # br2684ctl -b -c o -a 8.32 > > bash: /usr/sbin/br2684ctl: cannot execute binary file /*esto no lo >entiendo, > > que está fallando*/ > > > > root@:~ # ls /usr/sbin/br2684ctl -l > > -rwxr-xr-x 1 root root 13821 2006-01-26 22:12 /usr/sbin/br2684ctl > > root@:~ # > > root@:~ # pppd call speedtch > > Plugin rp-pppoe.so loaded. > > RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 > > pppd: In file /etc/ppp/peers/speedtch: unrecognized option 'nas0' > > > > Many thanks for your help > > > > > > > > > > >From: "Yousry S. Abdel-Hamid" <[EMAIL PROTECTED]> > > >Reply-To: [email protected] > > >To: <[email protected]> > > >Subject: [speedtouch] Re: speedtouch ubuntu problems > > >Date: Thu, 26 Jan 2006 19:49:57 +0200 > > > > > > > > >Did you install libatm and gcc ?? or are they already installed > > >?? check synaptic.. > > >Also, did the firmware unzip properly (note your modem version) > > >?? > > >Check AGAIN your VP and VC with your provider and substitute > > >their values correctly as well as your username and password and > > >they are correctly placed in chap and/or pap secrets > > > > > >do you connect manually ?? (try typing $ /etc/init.d speedtch > > >start > > > > > >Thanks > > > > > > > > > > > > ----- Original Message ----- > > > From: Rafael Flores > > > To: [email protected] > > > Sent: Thursday, January 26, 2006 12:32 PM > > > Subject: [speedtouch] speedtouch ubuntu problems > > > > > > > > > > > > Hello guys, > > > i have installed ubuntu hoary and followed the guide at > > > http://www.linux-usb.org/SpeedTouch/ubuntu/index.html line by > > >line and still > > > i can't access the internet- > > > My ISP is Telefonica in Spain, so it uses PPPoE. > > > > > > > > > I have bee loooking is te mailing archieve and I didn't find > > >nothing that > > > helps me. > > > > > > If I type > > > pppd call speedtch > > > returns: unrecognized option nas0 > > > > > > so I tried > > > br2684ctl -b -c o -a 8.32 > > > returns: cannot execute binary file > > > > > > but I have successfully done: > > > dowloaded the binary file to my home dir > > > and typed from it dir > > > sudo install -m 755 br2684ctl /usr/sbin > > > > > > Any ideas, please? > > > Million thanks. > > > PD: Excuse me my poor english :( > > > > > > _________________________________________________________________ > > > Moda para esta temporada. Ponte al día de todas las > > >tendencias. > > > http://www.msn.es/Mujer/moda/default.asp > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > Pour se désinscrire : > > >mailto:[EMAIL PROTECTED] > > > > > > > > > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB > > >Pour se désinscrire : > > >mailto:[EMAIL PROTECTED] > > > > > > > > > > _________________________________________________________________ > > ¿Estás pensando en cambiar de coche? Todas los modelos de serie y extras >en > > MSN Motor. http://motor.msn.es/researchcentre/ > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se désinscrire : >mailto:[EMAIL PROTECTED] > > > > > > >Liste de diffusion modem ALCATEL SpeedTouch USB >Pour se désinscrire : >mailto:[EMAIL PROTECTED] > > _________________________________________________________________ Horóscopo, tarot, numerología... Escucha lo que te dicen los astros. http://astrocentro.msn.es/ Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
