Gilles Espinasse <[EMAIL PROTECTED]> escribió:
----- Original Message ----- From: "Damian" To: Sent: Monday, September 04, 2006 4:54 PM Subject: [speedtouch] Re: Firmware problem > > >>Damian wrote: > >> Hi, i'm really new to linux, and trying to install the SpeedTouch330 > >>USB Modem on my Knoppix/debian distribution. (pppoe) > >> > >> The first thing i did was to follow the steps here (steve parker) > >>http://steve-parker.org/speedtouchconf/troubleshooting.shtml > >> > >> and it "kind of" worked. I mean, i remember the firmware loaded and > >>dsl line got up, tough it didnt connect because of a problem with pppoe. > >>I asked the author and he said he couldn't test it with pppoe so i > >>decided to go another way. > >> > >> Then, i followed the steps here: > >>http://www.linux-usb.org/SpeedTouch/ubuntu/index.html and realised the > >>firmware doesnt even load. > >> > >> Ive tried with > >> > >> rev4fw.zip -> (the one that worked with steve parker's script) > >> ZZZL_3.012 > >> > >> And both lights stay solid green during boot. I have to say ive tried > >>some other ways that seem to have made things even worse (now steve > >>parker's script doesnt even work) > >What kernel are you using? - you can find out with the command uname -r > >Are you using udev or the older hotplug scripts? > > > >Andy > > Hi Andy, im using 2.4.27 > > Hotplug? I have no idea... > > The error message steve parker's script throws is: > > The modem_run command failed (code 235) > modem_run results: > Mutex value not OK > FAILED because of modem_run error 235 > [EMAIL PROTECTED]:/modem/modem/speedtouchconf-27-Jun-2006# Sep 4 11:26:41 box modem_run[4645]: modem_run version 1.3.1 started by root uid 0 > Firmware can be loaded only once (until the modem is unpowered) Unplug the modem and plug it again and you could retry. You have to understand there is many many ways to make it work. To make short, you could use - modem_run and pppoa3 (in both PPPoA and PPPoE mode) - modem_run and kernel module speedtch ( with pppoatm or pppoe plugin or pppoe usermode) - with a 2.6 kernel module usbatm and speedtch ( with pppoatm or pppoe plugin or pppoe usermode) There is information to make it work on PPPoE (in old style modem_run/pppoa3) http://cosmos.oninetspeed.pt/jose.bernardo/speedtouch.html Or you could look at http://ipcop.cvs.sourceforge.net/ipcop/ipcop/src/rc.d/rc.alcatelusb?hideattic=0&revision=1.7.2.11&view=markup This is only the first part (configure the modem), start pppd is in another script in rc.red Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] First of all, thanks for the response. Now, i know you have to shutdown the computer (i even unplug the modem just in case) but it doesnt work The first page is for Mandrake, and behind a firewall... to tell you the truth, i dont understand half a word. With the second page just the same, i see there is a script, but dont know WHAT it does or HOW to use it. Damian --------------------------------- Preguntá. Respondé. Descubrí. Todo lo que querías saber, y lo que ni imaginabas, está en Yahoo! Respuestas (Beta). Probalo ya! Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
