Hello need some help for this problem : when i boot my system (with firmwre helper et two stages load) my speedtouch usb works fine
but when i REboot, come a trouble (under linux and not under Windows) : the firmware doesn't load i resolve the stuff under mandriva (kernel 2.6.12) by using the (old) command "modem_run" alas under debian etch (kernel 2.6.16) this latter command doesn't work - a possible solution is to disconnect my modem many minits - sometimes it succeeds what happen ? (that doesn't happen under Windows ?) kernel message when i reconnect the modem (under debian) is : Sep 22 20:29:53 debian kernel: usb 2-2: new full speed USB device using ohci_hcd and address 4 Sep 22 20:29:53 debian kernel: usb 2-2: configuration #1 chosen from 1 choice Sep 22 20:29:54 debian kernel: usb 2-2: reset full speed USB device using ohci_hcd and address 4 Sep 22 20:29:54 debian udevd-event[7729]: run_program: exec of program '/lib/udev/firmware_helper' failed Sep 22 20:29:54 debian udevd-event[7756]: run_program: exec of program '/lib/udev/firmware_helper' failed Sep 22 20:29:54 debian udevd-event[7765]: run_program: exec of program '/lib/udev/firmware_helper' failed Sep 22 20:29:54 debian kernel: speedtch 2-2:1.0: found stage 1 firmware speedtch-1.bin Sep 22 20:29:54 debian udevd-event[7778]: run_program: exec of program '/lib/udev/firmware_helper' failed Sep 22 20:29:54 debian udevd-event[7784]: run_program: exec of program '/lib/udev/firmware_helper' failed Sep 22 20:29:54 debian udevd-event[7805]: run_program: exec of program '/lib/udev/firmware_helper' failed Sep 22 20:29:54 debian kernel: speedtch 2-2:1.0: found stage 2 firmware speedtch-2.bin Sep 22 20:29:56 debian kernel: speedtch 2-2:1.0: speedtch_upload_firmware: write BLOCK1 to modem failed (-110)! Sep 22 20:29:56 debian kernel: speedtch 2-2:1.0: speedtch_heavy_init: firmware upload failed (-110)! any help would be appreciated thank in advance ! Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
