Hi Antares,
thank you for your quick reply. It brought me a step further and it was easy
enough to find out the 1.32 for the Deutsche Telekom (with a little help of
Google).
Now I am stuck with
Timeout waiting for PADO packets
Google showed several hits on this error, but I found no conclusion.
Any help would be appreciated.
This is what I did:
LKG7F63BB:~# modprobe speedtch
LKG7F63BB:~# modprobe br2684
LKG7F63BB:~# modprobe pppoe
LKG7F63BB:~# dmesg | grep 'ADSL line is up'
ATM dev 0: ADSL line is up (864 kb/s down | 160 kb/s up)
LKG7F63BB:~# br2684ctl -b -c 0 -a 32.1
br2684ctl[3762]: Interface "nas0" created sucessfully
br2684ctl[3762]: Communicating over ATM 0.32.1, encapsulation: LLC
br2684ctl[3762]: Interface configured
LKG7F63BB:~# ip link set nas0 up
LKG7F63BB:~# pppd call lycos-dsl
Plugin rp-pppoe.so loaded.
Timeout waiting for PADO packets
Unable to complete PPPoE Discovery
LKG7F63BB:~#
The pppd config (I replaced [EMAIL PROTECTED] with my data):
LKG7F63BB:~# cat /etc/ppp/peers/lycos-dsl
noipdefault
defaultroute
user "[EMAIL PROTECTED]"
noauth
updetach
usepeerdns
plugin rp-pppoe.so
nas0
### If the firmware loads and pppd won't
### connect uncomment this option to make
### pppd be more verbose in the system log
debug
### For more details (and more options)
### read man pppd
LKG7F63BB:~#
Thanks,
Rainer
PS: My speedtouch shows firmware verison 0.01. Should I be worried?
LKG7F63BB:~# awk '/4061/ { print $5 }' /proc/bus/usb/devices
0.01
LKG7F63BB:~#
Am Mittwoch, 22. November 2006 14:47 schrieb antares dark:
> Hello, look at the 6th line:
> > LKG7F63BB:~# br2684ctl -b -c 0 -a VP.VC
>
> You shoud change the VP.VC by numbers like the ones in
> in this listing (i don't see telekom germany)
> http://www.linux-usb.org/SpeedTouch/faq/index.html#q12
>
> Antares
>
> --- Rainer Dorsch <[EMAIL PROTECTED]> escribió:
> > Many thanks for the replies. I try to get the
> > speedtouch running with a Debian
> > etch on an nslu2.
> >
> > I am wondering, does the output of br2684 look ok?
> > Probably not, pppd gets a
> > timeout.
> >
> > Does anybody see, what is going wrong?
> >
> > LKG7F63BB:~# modprobe ppp_generic
> > LKG7F63BB:~# modprobe br2684
> > LKG7F63BB:~# modprobe pppoe
> > LKG7F63BB:~# dmesg | grep 'ADSL line is up'
> > ATM dev 0: ADSL line is up (864 kb/s down | 160 kb/s
> > up)
> > LKG7F63BB:~# br2684ctl -b -c 0 -a VP.VC
> > br2684ctl[2219]: Interface "nas0" created
> > sucessfully
> > br2684ctl[2219]: Could not parse ATM parameters
> > (error=-1)
> > br2684ctl[2219]: Communicating over ATM 0.0.0,
> > encapsulation: LLC
> > br2684ctl[2219]: Fatal: failed to connect on socket
> > LKG7F63BB:~# modprobe pppoa
> > FATAL: Module pppoa not found.
> > LKG7F63BB:~# ip addr add 192.168.0.1/32 dev nas0
> > LKG7F63BB:~# ip link set nas0 up
> > LKG7F63BB:~# ifconfig
> > eth0 Link encap:Ethernet HWaddr
> > 00:0F:66:7F:63:BB
> > inet addr:192.168.1.149
> > Bcast:192.168.1.255 Mask:255.255.255.0
> > inet6 addr: fe80::20f:66ff:fe7f:63bb/64
> > Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500
> > Metric:1
> > RX packets:13073 errors:0 dropped:0
> > overruns:0 frame:0
> > TX packets:8157 errors:0 dropped:0
> > overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:14998456 (14.3 MiB) TX
> > bytes:786652 (768.2 KiB)
> >
> > lo Link encap:Local Loopback
> > inet addr:127.0.0.1 Mask:255.0.0.0
> > inet6 addr: ::1/128 Scope:Host
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > RX packets:66 errors:0 dropped:0
> > overruns:0 frame:0
> > TX packets:66 errors:0 dropped:0
> > overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:5176 (5.0 KiB) TX bytes:5176
> > (5.0 KiB)
> >
> > nas0 Link encap:Ethernet HWaddr
> > 00:00:00:00:00:00
> > inet addr:192.168.0.1 Bcast:0.0.0.0
> > Mask:255.255.255.255
> > inet6 addr: fe80::200:ff:fe00:0/64
> > Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500
> > Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0
> > frame:0
> > TX packets:0 errors:6 dropped:0 overruns:0
> > carrier:6
> > collisions:0 txqueuelen:1000
> > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> >
> > LKG7F63BB:~# pppd call lycos-dsl
> > Plugin rp-pppoe.so loaded.
> > Timeout waiting for PADO packets
> > Unable to complete PPPoE Discovery
> > LKG7F63BB:~# lsmod
> > Module Size Used by
> > pppoe 14208 0
> > pppox 3912 1 pppoe
> > br2684 9380 0
> > ppp_generic 29620 2 pppoe,pppox
> > slhc 7360 1 ppp_generic
> > speedtch 14928 0
> > usbatm 19264 1 speedtch
> > atm 48480 2 br2684,usbatm
> > ledtrig_heartbeat 3040 0
> > nfs 250932 0
> > ipv6 269416 20
> > nfsd 240200 17
> > exportfs 5792 1 nfsd
> > lockd 67252 3 nfs,nfsd
> > nfs_acl 4032 2 nfs,nfsd
> > sunrpc 165848 13
> > nfs,nfsd,lockd,nfs_acl
> > dm_snapshot 17148 0
> > dm_mirror 20948 0
> > dm_mod 59120 2
> > dm_snapshot,dm_mirror
> > rtc_dev 7432 0
> > ixp4xx_mac 14584 0
> > evdev 10400 0
> > ixp4xx_qmgr 7556 5 ixp4xx_mac
> > ixp4xx_npe 10656 2 ixp4xx_mac
> > firmware_class 10656 2 speedtch,ixp4xx_npe
> > ixp4xx_beeper 3616 0
> > ext3 137480 1
> > jbd 59368 1 ext3
> > mbcache 9188 1 ext3
> > sd_mod 19248 3
> > usb_storage 77707 2
> > scsi_mod 102768 2 sd_mod,usb_storage
> > ehci_hcd 31240 0
> > ohci_hcd 17156 0
> > usbcore 126952 6
> > speedtch,usbatm,usb_storage,ehci_hcd,ohci_hcd
> > LKG7F63BB:~#
> >
> > Am Sonntag, 19. November 2006 21:00 schrieb Gilles
> >
> > Espinasse:
> > > ----- Original Message -----
> > > From: "Rainer Dorsch" <[EMAIL PROTECTED]>
> > > To: <[email protected]>
> > > Sent: Sunday, November 19, 2006 6:25 PM
> > > Subject: [speedtouch] pppoe and
> >
> > http://www.linux-usb.org/SpeedTouch/ docu
> >
> > > > Hello,
> > > >
> > > > in
> >
> > http://www.linux-usb.org/SpeedTouch/LFS/index.html I
> > find
> >
> > > > [*] PPP over Ethernet (EXPERIMENTAL) (only
> >
> > needed if you're going to use
> >
> > > > PPPoE)
> > > > [*] PPP over ATM (only needed if you're going
> >
> > to use PPPoA)
> >
> > > > in the kernel config.
> > > >
> > > > In
>
> http://www.linux-usb.org/SpeedTouch/ubuntu/index.html
>
> > I see in the
> >
> > > PPPoE
> > >
> > > > config section (make a boot script):
> > > >
> > > > #!/bin/bash
> > > > modprobe ppp_generic
> > > > modprobe pppoatm
> > > > modprobe br2684
> > > >
> > > >
> > > > If that is right, it seems that
> > > > -> [*] PPP over ATM (only needed if you're
> >
> > going to use PPPoA) is also
> >
> > > needed
> > >
> > > > for PPPoE
> > > > -> pppoe seems to be not needed at all (?)
> > > >
> > > > Or the modprobes here are simply wrong.
> > > >
> > > > Can anyboby help?
> > >
> > > Yes, this should be wrong
> > >
> > > This should be enought using the speedtouch as an
> >
> > atm interface
> >
> > > modprobe br2684
> > > modprobe pppoe
> > >
> > > pppoe module depend on ppp_generic (look in
> >
> > modules.dep), so ppp_generic
> >
> > > will automaticly be loaded during modprobe pppoe
> > >
> > > In Germany, pppoe has to be used because that was
> >
> > the choice of Deutche
> >
> > > Telekom at the beginning.
> > > Annexe B modems is in use (adsl over isdn), this
> >
> > is less common in other
> >
> > > parts of Europe.
> > >
> > > Gilles
> > >
> > >
> > > Liste de diffusion modem ALCATEL SpeedTouch USB
> > > Pour se désinscrire :
>
> mailto:[EMAIL PROTECTED]
>
> > --
> > Rainer Dorsch
> > Alzentalstr. 28
> > D-71083 Herrenberg
> > 07032-919495
> > jabber: [EMAIL PROTECTED]
>
> === message truncated ===
>
>
> __________________________________________________
> Correo Yahoo!
> Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
> ¡Abrí tu cuenta ya! - http://correo.yahoo.com.ar
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se désinscrire :
> mailto:[EMAIL PROTECTED]
--
Rainer Dorsch
Alzentalstr. 28
D-71083 Herrenberg
07032-919495
jabber: [EMAIL PROTECTED]
GPG Fingerprint: 5966 C54C 2B3C 42CC 1F4F 8F59 E3A8 C538 7519 141E
Full GPG key: http://pgp.mit.edu/
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
