----- Original Message ----- From: "Piotr Sawicki" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, December 22, 2006 10:33 PM Subject: [speedtouch] Re: speedtouch ST330 USB works from time to time on opensuse 10.0
> > Dnia piątek 22 grudnia 2006 21:54, Gilles Espinasse napisał: > > ----- Original Message ----- > > From: "Piotr Sawicki" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Friday, December 22, 2006 9:34 PM > > Subject: [speedtouch] Re: speedtouch ST330 USB works from time to time on > > opensuse 10.0 > > > > > The only two files on my system, that contain a line: > > > > That's not what I ask you > > I know that 'lcp-max-configure 50' is in /etc/ppp/peers/t-dsl but I say you > > that this file is not used for sure as I doubt speedtouch could work with > > 'plugin capiplugin.so' > > > > I ask to look wich file is used to start your connection. You could try to > > grep with your ISP login or probably better with pppoa3. > > > > thanks for your patience > I hope that this is what you ask: ... > [EMAIL PROTECTED]:/etc/ppp> sudo grep -r [EMAIL PROTECTED] /etc > /etc/ppp/peers/adsl:user "[EMAIL PROTECTED]" > /etc/ppp/chap-secrets:"[EMAIL PROTECTED]" .... "*" # Added by > speedtouchconf > /etc/ppp/pap-secrets:"[EMAIL PROTECTED]" ..... "*" # Added by > speedtouchconf > /etc/sysconfig/network/providers/provider0:USERNAME='[EMAIL PROTECTED]' > [EMAIL PROTECTED]:/etc/ppp> sudo grep -r pppoa3 /etc > /etc/ppp/peers/adsl:pty "/usr/local/sbin/pppoa3 -e 1 -m -1 -c -vpi 0 -vci 35" > [EMAIL PROTECTED]:/etc/ppp> > Ok that mean that you would have to add lcp-max-configure 50 to /etc/ppp/peers/adsl file. You don't care if it is written in /etc/ppp/peers/t-dsl as this file is not used. Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
