Duncan, Here's my syslog as of today 1/29/07 (note there is a shutdown sequence at the top from the last time I was in ubuntu - 1/25/07)
Jan 25 16:47:15 localhost syslogd 1.4.1#17ubuntu7: restart. Jan 25 16:47:15 localhost anacron[4692]: Job `cron.daily' terminated Jan 25 16:50:40 localhost anacron[4692]: Job `cron.weekly' started Jan 25 16:50:40 localhost anacron[5646]: Updated timestamp for job `cron.weekly' to 2007-01-25 Jan 25 16:50:43 localhost exiting on signal 15 Jan 25 16:50:44 localhost syslogd 1.4.1#17ubuntu7: restart. Jan 25 16:50:44 localhost anacron[4692]: Job `cron.weekly' terminated Jan 25 16:50:44 localhost anacron[4692]: Normal exit (2 jobs run) Jan 25 17:00:07 localhost gconfd (samadams-4863): Exiting Jan 25 17:00:07 localhost gdm[4340]: Restarting computer... Jan 25 17:00:07 localhost gconfd (samadams-6167): starting (version 2.14.0), pid 6167 user 'samadams' Jan 25 17:00:07 localhost gconfd (samadams-6167): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 25 17:00:07 localhost gconfd (samadams-6167): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 1 Jan 25 17:00:07 localhost gconfd (samadams-6167): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 25 17:00:07 localhost gconfd (samadams-6167): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 25 17:00:07 localhost gconfd (samadams-6167): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 25 17:00:10 localhost shutdown[4340]: shutting down for system reboot Jan 25 17:00:10 localhost init: Switching to runlevel: 6 Jan 25 17:00:13 localhost kernel: [4295902.294000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Jan 25 17:00:13 localhost kernel: [4295902.294000] apm: disabled on user request. Jan 25 17:00:21 localhost sdpd[4648]: terminating... Jan 25 17:00:21 localhost hcid[4643]: Exit. Jan 25 17:00:21 localhost kernel: Kernel logging (proc) stopped. Jan 25 17:00:21 localhost kernel: Kernel log daemon terminating. Jan 25 17:00:21 localhost exiting on signal 15 Jan 29 11:59:28 localhost syslogd 1.4.1#17ubuntu7: restart. Jan 29 11:59:28 localhost kernel: Inspecting /boot/System.map-2.6.15-23-386 Jan 29 11:59:28 localhost kernel: Loaded 23018 symbols from /boot/System.map-2.6.15-23-386. Jan 29 11:59:28 localhost kernel: Symbols match kernel version 2.6.15. Jan 29 11:59:28 localhost kernel: No module symbols loaded - kernel modules not enabled. Jan 29 11:59:28 localhost kernel: [4294667.296000] Linux version 2.6.15-23-386 ([EMAIL PROTECTED]) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006 Jan 29 11:59:28 localhost kernel: [4294667.296000] BIOS-provided physical RAM map: Jan 29 11:59:28 localhost kernel: [4294667.296000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Jan 29 11:59:28 localhost kernel: [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jan 29 11:59:28 localhost kernel: [4294667.296000] BIOS-e820: 0000000000100000 - 000000000feac000 (usable) Jan 29 11:59:28 localhost kernel: [4294667.296000] BIOS-e820: 000000000feac000 - 0000000010000000 (reserved) Jan 29 11:59:28 localhost kernel: [4294667.296000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Jan 29 11:59:28 localhost kernel: [4294667.296000] 0MB HIGHMEM available. Jan 29 11:59:28 localhost kernel: [4294667.296000] 254MB LOWMEM available. Jan 29 11:59:28 localhost kernel: [4294667.296000] On node 0 totalpages: 65196 Jan 29 11:59:28 localhost kernel: [4294667.296000] DMA zone: 4096 pages, LIFO batch:0 Jan 29 11:59:28 localhost kernel: [4294667.296000] DMA32 zone: 0 pages, LIFO batch:0 Jan 29 11:59:28 localhost kernel: [4294667.296000] Normal zone: 61100 pages, LIFO batch:15 Jan 29 11:59:28 localhost kernel: [4294667.296000] HighMem zone: 0 pages, LIFO batch:0 Jan 29 11:59:28 localhost kernel: [4294667.296000] DMI 2.3 present. Jan 29 11:59:28 localhost kernel: [4294667.296000] ACPI: RSDP (v000 DELL ) @ 0x000fd790 Jan 29 11:59:28 localhost kernel: [4294667.296000] ACPI: RSDT (v001 DELL GX110 0x00000007 ASL 0x00000061) @ 0x000fd7a4 Jan 29 11:59:28 localhost kernel: [4294667.296000] ACPI: FADT (v001 DELL GX110 0x00000007 ASL 0x00000061) @ 0x000fd7cc Jan 29 11:59:28 localhost kernel: [4294667.296000] ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000 Jan 29 11:59:28 localhost kernel: [4294667.296000] ACPI: PM-Timer IO Port: 0x808 Jan 29 11:59:28 localhost kernel: [4294667.296000] Allocating PCI resources starting at 20000000 (gap: 10000000:efb00000) Jan 29 11:59:28 localhost kernel: [4294667.296000] Built 1 zonelists Jan 29 11:59:28 localhost kernel: [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash Jan 29 11:59:28 localhost kernel: [4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic" Jan 29 11:59:28 localhost kernel: [4294667.296000] mapped APIC to ffffd000 (011ff000) Jan 29 11:59:28 localhost kernel: [4294667.296000] Initializing CPU#0 Jan 29 11:59:28 localhost kernel: [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) Jan 29 11:59:28 localhost kernel: [4294667.296000] Detected 598.232 MHz processor. Jan 29 11:59:28 localhost kernel: [4294667.296000] Using pmtmr for high-res timesource Jan 29 11:59:29 localhost kernel: [4294667.296000] Console: colour VGA+ 80x25 Jan 29 11:59:29 localhost kernel: [4294667.592000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Jan 29 11:59:29 localhost kernel: [4294667.593000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Jan 29 11:59:29 localhost kernel: [4294667.627000] Memory: 247860k/260784k available (1976k kernel code, 12380k reserved, 606k data, 288k init, 0k highmem) Jan 29 11:59:29 localhost kernel: [4294667.627000] Checking if this processor honours the WP bit even in supervisor mode... Ok. Jan 29 11:59:29 localhost kernel: [4294667.687000] Calibrating delay using timer specific routine.. 1196.91 BogoMIPS (lpj=598458) Jan 29 11:59:29 localhost kernel: [4294667.687000] Security Framework v1.0.0 initialized Jan 29 11:59:29 localhost kernel: [4294667.687000] SELinux: Disabled at boot. Jan 29 11:59:29 localhost kernel: [4294667.687000] Mount-cache hash table entries: 512 Jan 29 11:59:29 localhost kernel: [4294667.687000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 Jan 29 11:59:29 localhost kernel: [4294667.687000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 Jan 29 11:59:29 localhost kernel: [4294667.687000] CPU: L1 I cache: 16K, L1 D cache: 16K Jan 29 11:59:29 localhost kernel: [4294667.687000] CPU: L2 cache: 256K Jan 29 11:59:29 localhost kernel: [4294667.687000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Jan 29 11:59:29 localhost kernel: [4294667.687000] mtrr: v2.0 (20020519) Jan 29 11:59:29 localhost kernel: [4294667.687000] CPU: Intel Pentium III (Coppermine) stepping 03 Jan 29 11:59:29 localhost kernel: [4294667.687000] Enabling fast FPU save and restore... done. Jan 29 11:59:29 localhost kernel: [4294667.687000] Enabling unmasked SIMD FPU exception support... done. Jan 29 11:59:29 localhost kernel: [4294667.687000] Checking 'hlt' instruction... OK. Jan 29 11:59:29 localhost kernel: [4294667.691000] checking if image is initramfs... it is Jan 29 11:59:29 localhost kernel: [4294670.315000] Freeing initrd memory: 6837k freed Jan 29 11:59:29 localhost kernel: [4294670.361000] ACPI: Looking for DSDT ... not found! Jan 29 11:59:29 localhost kernel: [4294670.377000] ACPI: setting ELCR to 0200 (from 0e00) Jan 29 11:59:29 localhost kernel: [4294670.378000] NET: Registered protocol family 16 Jan 29 11:59:29 localhost kernel: [4294670.378000] EISA bus registered Jan 29 11:59:29 localhost kernel: [4294670.378000] ACPI: bus type pci registered Jan 29 11:59:29 localhost kernel: [4294670.391000] PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=1 Jan 29 11:59:29 localhost kernel: [4294670.391000] PCI: Using configuration type 1 Jan 29 11:59:29 localhost kernel: [4294670.393000] ACPI: Subsystem revision 20051216 Jan 29 11:59:29 localhost kernel: [4294670.404000] ACPI: Interpreter enabled Jan 29 11:59:29 localhost kernel: [4294670.404000] ACPI: Using PIC for interrupt routing Jan 29 11:59:29 localhost kernel: [4294670.405000] ACPI: PCI Root Bridge [PCI0] (0000:00) Jan 29 11:59:29 localhost kernel: [4294670.405000] PCI: Probing PCI hardware (bus 00) Jan 29 11:59:29 localhost kernel: [4294670.405000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Jan 29 11:59:29 localhost kernel: [4294670.409000] Boot video device is 0000:00:01.0 Jan 29 11:59:29 localhost kernel: [4294670.409000] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO Jan 29 11:59:29 localhost kernel: [4294670.409000] PCI quirk: region 0880-08bf claimed by ICH4 GPIO Jan 29 11:59:29 localhost kernel: [4294670.410000] PCI: Transparent bridge - 0000:00:1e.0 Jan 29 11:59:29 localhost kernel: [4294670.410000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jan 29 11:59:29 localhost kernel: [4294670.414000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Jan 29 11:59:29 localhost kernel: [4294670.424000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15) Jan 29 11:59:29 localhost kernel: [4294670.426000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) Jan 29 11:59:29 localhost kernel: [4294670.427000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. Jan 29 11:59:29 localhost kernel: [4294670.428000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) Jan 29 11:59:29 localhost kernel: [4294670.428000] Linux Plug and Play Support v0.97 (c) Adam Belay Jan 29 11:59:29 localhost kernel: [4294670.428000] pnp: PnP ACPI init Jan 29 11:59:29 localhost kernel: [4294670.451000] pnp: PnP ACPI: found 13 devices Jan 29 11:59:29 localhost kernel: [4294670.451000] PnPBIOS: Disabled by ACPI PNP Jan 29 11:59:29 localhost kernel: [4294670.451000] PCI: Using ACPI for IRQ routing Jan 29 11:59:29 localhost kernel: [4294670.451000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Jan 29 11:59:29 localhost kernel: [4294670.461000] pnp: 00:0c: ioport range 0x800-0x85f could not be reserved Jan 29 11:59:29 localhost kernel: [4294670.461000] pnp: 00:0c: ioport range 0xc00-0xc7f has been reserved Jan 29 11:59:29 localhost kernel: [4294670.461000] pnp: 00:0c: ioport range 0x860-0x8ff could not be reserved Jan 29 11:59:29 localhost kernel: [4294670.461000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0 Jan 29 11:59:29 localhost kernel: [4294670.461000] PCI: Bridge: 0000:00:1e.0 Jan 29 11:59:29 localhost kernel: [4294670.461000] IO window: e000-efff Jan 29 11:59:29 localhost kernel: [4294670.461000] MEM window: fd000000-feffffff Jan 29 11:59:29 localhost kernel: [4294670.461000] PREFETCH window: f9000000-faffffff Jan 29 11:59:29 localhost kernel: [4294670.461000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 Jan 29 11:59:29 localhost kernel: [4294670.463000] audit: initializing netlink socket (disabled) Jan 29 11:59:29 localhost kernel: [4294670.463000] audit(1170071929.462:1): initialized Jan 29 11:59:29 localhost kernel: [4294670.463000] VFS: Disk quotas dquot_6.5.1 Jan 29 11:59:29 localhost kernel: [4294670.463000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 29 11:59:29 localhost kernel: [4294670.463000] Initializing Cryptographic API Jan 29 11:59:29 localhost kernel: [4294670.463000] io scheduler noop registered Jan 29 11:59:29 localhost kernel: [4294670.463000] io scheduler anticipatory registered Jan 29 11:59:29 localhost kernel: [4294670.463000] io scheduler deadline registered Jan 29 11:59:29 localhost kernel: [4294670.463000] io scheduler cfq registered Jan 29 11:59:29 localhost kernel: [4294670.464000] isapnp: Scanning for PnP cards... Jan 29 11:59:29 localhost kernel: [4294670.821000] isapnp: No Plug & Play device found Jan 29 11:59:29 localhost kernel: [4294670.871000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 Jan 29 11:59:29 localhost kernel: [4294670.874000] serio: i8042 AUX port at 0x60,0x64 irq 12 Jan 29 11:59:29 localhost kernel: [4294670.875000] serio: i8042 KBD port at 0x60,0x64 irq 1 Jan 29 11:59:29 localhost kernel: [4294670.875000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled Jan 29 11:59:29 localhost kernel: [4294670.875000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 29 11:59:29 localhost kernel: [4294670.875000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 29 11:59:29 localhost kernel: [4294670.883000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jan 29 11:59:29 localhost kernel: [4294670.883000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Jan 29 11:59:29 localhost kernel: [4294670.885000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize Jan 29 11:59:29 localhost kernel: [4294670.885000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jan 29 11:59:29 localhost kernel: [4294670.885000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jan 29 11:59:29 localhost kernel: [4294670.885000] mice: PS/2 mouse device common for all mice Jan 29 11:59:29 localhost kernel: [4294670.886000] EISA: Probing bus 0 at eisa.0 Jan 29 11:59:29 localhost kernel: [4294670.886000] EISA: Detected 0 cards. Jan 29 11:59:29 localhost kernel: [4294670.886000] NET: Registered protocol family 2 Jan 29 11:59:29 localhost kernel: [4294670.896000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) Jan 29 11:59:29 localhost kernel: [4294670.896000] TCP established hash table entries: 8192 (order: 3, 32768 bytes) Jan 29 11:59:29 localhost kernel: [4294670.896000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) Jan 29 11:59:29 localhost kernel: [4294670.896000] TCP: Hash tables configured (established 8192 bind 8192) Jan 29 11:59:29 localhost kernel: [4294670.896000] TCP reno registered Jan 29 11:59:29 localhost kernel: [4294670.897000] TCP bic registered Jan 29 11:59:29 localhost kernel: [4294670.897000] NET: Registered protocol family 1 Jan 29 11:59:29 localhost kernel: [4294670.897000] NET: Registered protocol family 8 Jan 29 11:59:29 localhost kernel: [4294670.897000] NET: Registered protocol family 20 Jan 29 11:59:29 localhost kernel: [4294670.897000] Using IPI Shortcut mode Jan 29 11:59:29 localhost kernel: [4294670.897000] ACPI wakeup devices: Jan 29 11:59:29 localhost kernel: [4294670.897000] PCI0 USB0 PCI1 KBD Jan 29 11:59:29 localhost kernel: [4294670.897000] ACPI: (supports S0 S1 S4 S5) Jan 29 11:59:29 localhost kernel: [4294670.897000] Freeing unused kernel memory: 288k freed Jan 29 11:59:29 localhost kernel: [4294670.939000] input: AT Translated Set 2 keyboard as /class/input/input0 Jan 29 11:59:29 localhost kernel: [4294671.068000] vga16fb: initializing Jan 29 11:59:29 localhost kernel: [4294671.068000] vga16fb: mapped to 0xc00a0000 Jan 29 11:59:29 localhost kernel: [4294671.180000] Console: switching to colour frame buffer device 80x25 Jan 29 11:59:29 localhost kernel: [4294671.180000] fb0: VGA16 VGA frame buffer device Jan 29 11:59:29 localhost kernel: [4294672.300000] Capability LSM initialized Jan 29 11:59:29 localhost kernel: [4294673.903000] ICH: IDE controller at PCI slot 0000:00:1f.1 Jan 29 11:59:29 localhost kernel: [4294673.903000] ICH: chipset revision 2 Jan 29 11:59:29 localhost kernel: [4294673.903000] ICH: not 100%% native mode: will probe irqs later Jan 29 11:59:29 localhost kernel: [4294673.903000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA Jan 29 11:59:29 localhost kernel: [4294673.904000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Jan 29 11:59:29 localhost kernel: [4294673.904000] Probing IDE interface ide0... Jan 29 11:59:29 localhost kernel: [4294674.168000] hda: ST3120814A, ATA DISK drive Jan 29 11:59:29 localhost kernel: [4294674.423000] hdb: WDC WD204BA, ATA DISK drive Jan 29 11:59:29 localhost kernel: [4294674.475000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jan 29 11:59:29 localhost kernel: [4294674.475000] Probing IDE interface ide1... Jan 29 11:59:29 localhost kernel: [4294674.841000] hdc: DVDROM 12X, ATAPI CD/DVD-ROM drive Jan 29 11:59:29 localhost kernel: [4294675.249000] hdd: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive Jan 29 11:59:29 localhost kernel: [4294675.300000] ide1 at 0x170-0x177,0x376 on irq 15 Jan 29 11:59:29 localhost kernel: [4294675.322000] hda: max request size: 1024KiB Jan 29 11:59:29 localhost kernel: [4294675.355000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(66) Jan 29 11:59:29 localhost kernel: [4294675.380000] hda: cache flushes supported Jan 29 11:59:29 localhost kernel: [4294675.380000] hda: hda1 hda2 < hda5 > Jan 29 11:59:29 localhost kernel: [4294675.428000] hdb: max request size: 128KiB Jan 29 11:59:29 localhost kernel: [4294675.446000] hdb: 39876480 sectors (20416 MB) w/2048KiB Cache, CHS=39560/16/63, UDMA(66) Jan 29 11:59:29 localhost kernel: [4294675.446000] hdb: cache flushes not supported Jan 29 11:59:29 localhost kernel: [4294675.446000] hdb: hdb1 hdb2 < hdb5 > Jan 29 11:59:29 localhost kernel: [4294675.481000] hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) Jan 29 11:59:29 localhost kernel: [4294675.481000] Uniform CD-ROM driver Revision: 3.20 Jan 29 11:59:29 localhost kernel: [4294675.485000] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) Jan 29 11:59:29 localhost kernel: [4294676.025000] usbcore: registered new driver usbfs Jan 29 11:59:29 localhost kernel: [4294676.026000] usbcore: registered new driver hub Jan 29 11:59:29 localhost kernel: [4294676.032000] USB Universal Host Controller Interface driver v2.3 Jan 29 11:59:29 localhost kernel: [4294676.033000] **** SET: Misaligned resource pointer: cfb74f02 Type 07 Len 0 Jan 29 11:59:29 localhost kernel: [4294676.034000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jan 29 11:59:29 localhost kernel: [4294676.034000] PCI: setting IRQ 11 as level-triggered Jan 29 11:59:29 localhost kernel: [4294676.034000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 Jan 29 11:59:29 localhost kernel: [4294676.034000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 Jan 29 11:59:29 localhost kernel: [4294676.034000] uhci_hcd 0000:00:1f.2: UHCI Host Controller Jan 29 11:59:29 localhost kernel: [4294676.035000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 Jan 29 11:59:29 localhost kernel: [4294676.035000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80 Jan 29 11:59:29 localhost kernel: [4294676.036000] hub 1-0:1.0: USB hub found Jan 29 11:59:29 localhost kernel: [4294676.036000] hub 1-0:1.0: 2 ports detected Jan 29 11:59:29 localhost kernel: [4294676.304000] Attempting manual resume Jan 29 11:59:29 localhost kernel: [4294676.343000] usb 1-1: new full speed USB device using uhci_hcd and address 2 Jan 29 11:59:29 localhost kernel: [4294676.363000] EXT3-fs: mounted filesystem with ordered data mode. Jan 29 11:59:29 localhost kernel: [4294676.397000] kjournald starting. Commit interval 5 seconds Jan 29 11:59:29 localhost kernel: [4294676.466000] hub 1-1:1.0: USB hub found Jan 29 11:59:29 localhost kernel: [4294676.468000] hub 1-1:1.0: 4 ports detected Jan 29 11:59:29 localhost kernel: [4294676.781000] usb 1-2: new full speed USB device using uhci_hcd and address 3 Jan 29 11:59:29 localhost kernel: [4294677.083000] usb 1-1.2: new full speed USB device using uhci_hcd and address 4 Jan 29 11:59:29 localhost kernel: [4294677.346000] usb 1-1.3: new full speed USB device using uhci_hcd and address 5 Jan 29 11:59:29 localhost kernel: [4294677.435000] usb 1-1.3: 400mA over 100mA budget! Jan 29 11:59:29 localhost kernel: [4294677.436000] hub 1-1:1.0: 194mA over power budget! Jan 29 11:59:29 localhost kernel: [4294677.605000] usb 1-1.4: new full speed USB device using uhci_hcd and address 6 Jan 29 11:59:29 localhost kernel: [4294677.724000] usb 1-1.3: 400mA over 100mA budget! Jan 29 11:59:29 localhost kernel: [4294677.724000] hub 1-1:1.0: 196mA over power budget! Jan 29 11:59:29 localhost kernel: [4294690.869000] i810_smbus 0000:00:01.0: i810/i815 i2c device found. Jan 29 11:59:29 localhost kernel: [4294691.047000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Jan 29 11:59:29 localhost kernel: [4294691.120000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Jan 29 11:59:29 localhost kernel: [4294692.613000] parport: PnPBIOS parport detected. Jan 29 11:59:29 localhost kernel: [4294692.613000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] Jan 29 11:59:29 localhost kernel: [4294692.622000] hw_random hardware driver 1.0.0 loaded Jan 29 11:59:29 localhost kernel: [4294692.644000] Linux agpgart interface v0.101 (c) Dave Jones Jan 29 11:59:29 localhost kernel: [4294692.698000] agpgart: Detected an Intel i810 E Chipset. Jan 29 11:59:29 localhost kernel: [4294692.707000] agpgart: detected 4MB dedicated video ram. Jan 29 11:59:29 localhost kernel: [4294692.717000] agpgart: AGP aperture is 64M @ 0xf4000000 Jan 29 11:59:29 localhost kernel: [4294693.087000] input: PC Speaker as /class/input/input1 Jan 29 11:59:29 localhost kernel: [4294693.265000] **** SET: Misaligned resource pointer: cf89f422 Type 07 Len 0 Jan 29 11:59:29 localhost kernel: [4294693.266000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 Jan 29 11:59:29 localhost kernel: [4294693.266000] PCI: setting IRQ 10 as level-triggered Jan 29 11:59:29 localhost kernel: [4294693.266000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Jan 29 11:59:29 localhost kernel: [4294693.266000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 Jan 29 11:59:29 localhost kernel: [4294693.277000] Floppy drive(s): fd0 is 1.44M Jan 29 11:59:29 localhost kernel: [4294693.287000] Real Time Clock Driver v1.12 Jan 29 11:59:29 localhost kernel: [4294693.292000] FDC 0 is a National Semiconductor PC87306 Jan 29 11:59:29 localhost kernel: [4294693.577000] intel8x0_measure_ac97_clock: measured 50647 usecs Jan 29 11:59:29 localhost kernel: [4294693.577000] intel8x0: clocking to 48000 Jan 29 11:59:29 localhost kernel: [4294693.580000] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 Jan 29 11:59:29 localhost kernel: [4294693.580000] 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Jan 29 11:59:29 localhost kernel: [4294693.580000] 0000:01:08.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001ecc0. Vers LK1.1.19 Jan 29 11:59:29 localhost kernel: [4294695.534000] usb 1-2: reset full speed USB device using uhci_hcd and address 3 Jan 29 11:59:29 localhost kernel: [4294695.659000] usbcore: registered new driver speedtch Jan 29 11:59:29 localhost kernel: [4294695.709000] speedtch 1-2:1.0: found stage 1 firmware speedtch-1.bin Jan 29 11:59:29 localhost kernel: [4294695.775000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004 Jan 29 11:59:29 localhost kernel: [4294695.776000] usbcore: registered new driver usblp Jan 29 11:59:29 localhost kernel: [4294695.776000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Jan 29 11:59:29 localhost kernel: [4294695.788000] SCSI subsystem initialized Jan 29 11:59:29 localhost kernel: [4294695.797000] Linux video capture interface: v1.00 Jan 29 11:59:29 localhost kernel: [4294695.814000] Initializing USB Mass Storage driver... Jan 29 11:59:29 localhost kernel: [4294695.814000] scsi0 : SCSI emulation for USB Mass Storage devices Jan 29 11:59:29 localhost kernel: [4294695.815000] usb-storage: device found at 4 Jan 29 11:59:29 localhost kernel: [4294695.815000] usb-storage: waiting for device to settle before scanning Jan 29 11:59:29 localhost kernel: [4294695.815000] usbcore: registered new driver usb-storage Jan 29 11:59:29 localhost kernel: [4294695.815000] USB Mass Storage support registered. Jan 29 11:59:29 localhost kernel: [4294695.838000] quickcam: QuickCam USB camera found (driver version QuickCam USB 0.6.3 $Date: 2005/04/15 19:32:49 $) Jan 29 11:59:29 localhost kernel: [4294695.838000] quickcam: Kernel:2.6.15-23-386 bus:1 class:FF subclass:FF vendor:046D product:0840 Jan 29 11:59:29 localhost kernel: [4294695.842000] quickcam: Sensor HDCS-1000/1100 detected Jan 29 11:59:29 localhost kernel: [4294695.844000] quickcam: Registered device: /dev/video0 Jan 29 11:59:29 localhost kernel: [4294695.844000] usbcore: registered new driver quickcam Jan 29 11:59:29 localhost kernel: [4294696.124000] speedtch 1-2:1.0: found stage 2 firmware speedtch-2.bin Jan 29 11:59:29 localhost kernel: [4294696.563000] lp0: using parport0 (interrupt-driven). Jan 29 11:59:29 localhost kernel: [4294696.736000] Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k Jan 29 11:59:29 localhost kernel: [4294696.894000] EXT3 FS on hda1, internal journal Jan 29 11:59:29 localhost kernel: [4294697.285000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 Jan 29 11:59:29 localhost kernel: [4294697.285000] md: bitmap version 4.39 Jan 29 11:59:29 localhost kernel: [4294698.072000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] Jan 29 11:59:29 localhost kernel: [4294698.433000] cdrom: open failed. Jan 29 11:59:29 localhost kernel: [4294698.867000] cdrom: open failed. Jan 29 11:59:29 localhost kernel: [4294698.872000] cdrom: open failed. Jan 29 11:59:29 localhost kernel: [4294699.489000] NTFS driver 2.1.25 [Flags: R/O MODULE]. Jan 29 11:59:29 localhost kernel: [4294699.547000] NTFS volume version 3.1. Jan 29 11:59:29 localhost kernel: [4294700.819000] Vendor: Kingston Model: DataTraveler U3 Rev: 6.50 Jan 29 11:59:29 localhost kernel: [4294700.819000] Type: Direct-Access ANSI SCSI revision: 00 Jan 29 11:59:29 localhost kernel: [4294700.822000] Vendor: Kingston Model: DataTraveler U3 Rev: 6.50 Jan 29 11:59:29 localhost kernel: [4294700.822000] Type: CD-ROM ANSI SCSI revision: 00 Jan 29 11:59:29 localhost kernel: [4294700.827000] usb-storage: device scan complete Jan 29 11:59:29 localhost kernel: [4294700.895000] Driver 'sd' needs updating - please use bus_type methods Jan 29 11:59:29 localhost kernel: [4294700.902000] SCSI device sda: 1961695 512-byte hdwr sectors (1004 MB) Jan 29 11:59:29 localhost kernel: [4294700.905000] sda: Write Protect is off Jan 29 11:59:29 localhost kernel: [4294700.905000] sda: Mode Sense: 45 00 00 08 Jan 29 11:59:29 localhost kernel: [4294700.905000] sda: assuming drive cache: write through Jan 29 11:59:29 localhost kernel: [4294700.956000] SCSI device sda: 1961695 512-byte hdwr sectors (1004 MB) Jan 29 11:59:29 localhost kernel: [4294700.963000] sda: Write Protect is off Jan 29 11:59:29 localhost kernel: [4294700.963000] sda: Mode Sense: 45 00 00 08 Jan 29 11:59:29 localhost kernel: [4294700.963000] sda: assuming drive cache: write through Jan 29 11:59:29 localhost kernel: [4294700.963000] sda: sda1 Jan 29 11:59:29 localhost kernel: [4294700.976000] sd 0:0:0:0: Attached scsi removable disk sda Jan 29 11:59:29 localhost kernel: [4294701.059000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jan 29 11:59:29 localhost kernel: [4294701.060000] sr 0:0:0:1: Attached scsi generic sg1 type 5 Jan 29 11:59:29 localhost kernel: [4294701.088000] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray Jan 29 11:59:29 localhost kernel: [4294701.089000] sr 0:0:0:1: Attached scsi CD-ROM sr0 Jan 29 11:59:29 localhost kernel: [4294701.697000] NET: Registered protocol family 17 Jan 29 11:59:29 localhost kernel: [4294706.501000] CSLIP: code copyright 1989 Regents of the University of California Jan 29 11:59:29 localhost kernel: [4294706.512000] PPP generic driver version 2.4.2 Jan 29 11:59:29 localhost kernel: [4294706.600000] NET: Registered protocol family 10 Jan 29 11:59:29 localhost kernel: [4294706.600000] lo: Disabled Privacy Extensions Jan 29 11:59:29 localhost kernel: [4294706.601000] IPv6 over IPv4 tunneling driver Jan 29 11:59:29 localhost kernel: [4294708.235000] ACPI: Power Button (FF) [PWRF] Jan 29 11:59:29 localhost kernel: [4294708.556000] ibm_acpi: ec object not found Jan 29 11:59:29 localhost kernel: [4294708.624000] pcc_acpi: loading... Jan 29 11:59:33 localhost hpiod: 0.9.7 accepting connections at 4315... Jan 29 11:59:35 localhost kernel: [4294717.029000] ppdev: user-space parallel port driver Jan 29 11:59:35 localhost kernel: [4294717.436000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Jan 29 11:59:35 localhost kernel: [4294717.436000] apm: overridden by ACPI. Jan 29 11:59:46 localhost hcid[4703]: Bluetooth HCI daemon Jan 29 11:59:46 localhost kernel: [4294727.869000] Bluetooth: Core ver 2.8 Jan 29 11:59:46 localhost kernel: [4294727.869000] NET: Registered protocol family 31 Jan 29 11:59:46 localhost kernel: [4294727.869000] Bluetooth: HCI device and connection manager initialized Jan 29 11:59:46 localhost kernel: [4294727.869000] Bluetooth: HCI socket layer initialized Jan 29 11:59:46 localhost hcid[4703]: Can't get system message bus name: Connection ":1.1" is not allowed to own the service "org.bluez" due to security policies in the configuration file Jan 29 11:59:46 localhost kernel: [4294727.948000] Bluetooth: L2CAP ver 2.8 Jan 29 11:59:46 localhost kernel: [4294727.948000] Bluetooth: L2CAP socket layer initialized Jan 29 11:59:46 localhost kernel: [4294727.982000] Bluetooth: RFCOMM socket layer initialized Jan 29 11:59:46 localhost kernel: [4294727.982000] Bluetooth: RFCOMM TTY layer initialized Jan 29 11:59:46 localhost kernel: [4294727.982000] Bluetooth: RFCOMM ver 1.7 Jan 29 11:59:46 localhost sdpd[4708]: Bluetooth SDP daemon Jan 29 11:59:46 localhost anacron[4752]: Anacron 2.3 started on 2007-01-29 Jan 29 11:59:46 localhost anacron[4752]: Will run job `cron.daily' in 5 min. Jan 29 11:59:46 localhost anacron[4752]: Jobs will be executed sequentially Jan 29 11:59:46 localhost /usr/sbin/cron[4777]: (CRON) INFO (pidfile fd = 3) Jan 29 11:59:46 localhost /usr/sbin/cron[4778]: (CRON) STARTUP (fork ok) Jan 29 11:59:46 localhost /usr/sbin/cron[4778]: (CRON) INFO (Running @reboot jobs) Jan 29 11:59:57 localhost gconfd (samadams-4887): starting (version 2.14.0), pid 4887 user 'samadams' Jan 29 11:59:57 localhost gconfd (samadams-4887): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Jan 29 11:59:57 localhost gconfd (samadams-4887): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 1 Jan 29 11:59:57 localhost gconfd (samadams-4887): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Jan 29 11:59:57 localhost gconfd (samadams-4887): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3 Jan 29 11:59:57 localhost gconfd (samadams-4887): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4 Jan 29 12:00:02 localhost gconfd (samadams-4887): Resolved address "xml:readwrite:/home/samadams/.gconf" to a writable configuration source at position 0 Jan 29 12:00:07 localhost kernel: [4294749.467000] UDF-fs: No VRS found Jan 29 12:00:08 localhost kernel: [4294749.608000] UDF-fs: No VRS found Jan 29 12:00:08 localhost kernel: [4294750.201000] ISO 9660 Extensions: Microsoft Joliet Level 3 Jan 29 12:00:08 localhost kernel: [4294750.214000] ISO 9660 Extensions: RRIP_1991A Jan 29 12:00:11 localhost kernel: [4294753.277000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Jan 29 12:00:25 localhost kernel: [4294767.366000] input: PS2++ Logitech Wheel Mouse as /class/input/input2 Jan 29 12:00:25 localhost kernel: [4294767.461000] ts: Compaq touchscreen protocol output Jan 29 12:00:26 localhost chat[3802]: alarm Jan 29 12:00:26 localhost chat[3802]: send (AT^M) Jan 29 12:00:26 localhost chat[3802]: expect (OK) Jan 29 12:01:26 localhost chat[3802]: alarm Jan 29 12:01:26 localhost chat[3802]: Failed Jan 29 12:01:26 localhost pppd[3681]: Connect script failed Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
