Good day, 

Im having problems with the following software configuration:
pppoa-1.3.1,2       Run PPP over Alcatel's USB Speedtouch device
FreeBSD 8.0-Current

And the fllowing hardware configuration:
router# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x0000), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 addr 2: full speed, power 500 mA, config 1, Speed Touch
330(0x4061), THOMSON(0x06b9), rev 4.00
router# dmesg | grep -i usb
ohci0: <ATI SB400 USB Controller> mem 0xd0005000-0xd0005fff irq 19 at
device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
ohci1: <ATI SB400 USB Controller> mem 0xd0006000-0xd0006fff irq 19 at
device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1

Basically I have to kill syslogd for modem_run to work sanely, the
reason for this seems to be modem_run spamming the message:

Error reading interrupts

if syslogd is running modem_run and syslogd fight for cpu and syslogd
spams me with Last message repeated n times (where n can get as high as

Also with syslogd not running all appears to work except performance is
severaly impacted, 200kbps download speeds instead of my normall 800+.

-- Thank you for your time
-- Paul G Webster

Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]


Reply via email to