From: Mike Frysinger <[EMAIL PROTECTED]>
Use len_in_bytes when we care about the number of bytes transferred
rather than the number of spi transactions. (this value will be the
same for 8bit transfers, but not any other sizes)
Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
---
drivers/spi/spi_bfin5xx.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index 6c5671e..cc415e8 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -803,7 +803,7 @@ static void pump_transfers(unsigned long data)
if (bfin_addr_dcachable((unsigned long) drv_data->rx))
invalidate_dcache_range((unsigned long)
drv_data->rx,
(unsigned long)
(drv_data->rx +
- drv_data->len));
+
drv_data->len_in_bytes));
/* clear tx reg soformer data is not shifted out */
write_TDBR(drv_data, 0xFFFF);
@@ -829,7 +829,7 @@ static void pump_transfers(unsigned long data)
if (bfin_addr_dcachable((unsigned long) drv_data->tx))
flush_dcache_range((unsigned long) drv_data->tx,
(unsigned long) (drv_data->tx +
- drv_data->len));
+ drv_data->len_in_bytes));
/* start dma */
dma_enable_irq(drv_data->dma_channel);
@@ -892,7 +892,7 @@ static void pump_transfers(unsigned long data)
message->state = ERROR_STATE;
} else {
/* Update total byte transfered */
- message->actual_length += drv_data->len;
+ message->actual_length += drv_data->len_in_bytes;
/* Move to next transfer of this msg */
message->state = next_transfer(drv_data);
--
1.5.6.3
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
spi-devel-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
