On Monday 17 November 2008, Bryan Wu wrote:
> From: Yi Li <[EMAIL PROTECTED]>
>
> This bug can be observed when two SPI devices are sharing the spi bus:
> One device is set as SPI CS 7, another one is using SPI CS 4.
>
> In spi_bfin5xx.c: cs_active(), cs_deactive() are used to control SPI_FLG
> register. From the debug bellow:
>
> cs_active: flag: 0x7f91, chip->flag: 0x7f80, cs: 7
> cs_active: flag: 0xef91, chip->flag: 0xef10, cs: 4
>
> When device A (cs_7) activate CS 7, SPI_FLG is set as 0x7f91 (however,
> SPI_FLG should be set as 0x7f80, or 0x6f91 if in broadcast mode).
>
> Due to some HW bug (very possibly), if SPI_FLG is set as 0x7f91,
> SPISSEL7 is asserted, however SPISSEL4 will be asserted too (I can see
> this using the scope). This is unreasonable according to HRM.
>
> Signed-off-by: Yi Li <[EMAIL PROTECTED]>
> Signed-off-by: Bryan Wu <[EMAIL PROTECTED]>
Acked-by: David Brownell <[EMAIL PROTECTED]>
Yay! Real patch comments! Although ... it doesn't exactly
say *how* it was fixed, which would make the comments better.
("Clear flags that were wrongly left set." maybe.)
Saying what was fixed is at least a start.
> ---
> drivers/spi/spi_bfin5xx.c | 5 ++---
> 1 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
> index 9c602ad..8cf5d6e 100644
> --- a/drivers/spi/spi_bfin5xx.c
> +++ b/drivers/spi/spi_bfin5xx.c
> @@ -189,6 +189,7 @@ static void cs_deactive(struct driver_data *drv_data,
> struct chip_data *chip)
> {
> u16 flag = read_FLAG(drv_data);
>
> + flag &= ~chip->flag;
> flag |= (chip->flag << 8);
>
> write_FLAG(drv_data, flag);
> @@ -1032,7 +1033,6 @@ static int setup(struct spi_device *spi)
> struct bfin5xx_spi_chip *chip_info = NULL;
> struct chip_data *chip;
> struct driver_data *drv_data = spi_master_get_devdata(spi->master);
> - u8 spi_flg;
>
> /* Abort device setup if requested features are not supported */
> if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
> @@ -1115,8 +1115,7 @@ static int setup(struct spi_device *spi)
> * SPI_BAUD, not the real baudrate
> */
> chip->baud = hz_to_spi_baud(spi->max_speed_hz);
> - spi_flg = ~(1 << (spi->chip_select));
> - chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
> + chip->flag = 1 << (spi->chip_select);
> chip->chip_select_num = spi->chip_select;
>
> switch (chip->bits_per_word) {
> --
> 1.5.6.3
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
spi-devel-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
