In a message dated 7/12/2002 12:31:59 PM Eastern Daylight Time, [EMAIL PROTECTED] writes:
> My own 63 Spit4 has not been used for 10yrs and from what I can see normal > grease has been used as the lubricant. > > If you don't want to take the vertical links apart and clean them up (a long, tedious job) for 90wt, just pump new grease in till it comes out clean! Grease works fine, renew every oil change. Of course, check that the uprights are straight and the trunion bushings snug and not worn. If you take them apart be sure to use a never-sieze all over the bushing and bolt when reassembling! Clark Never underestimate the power of stupid people in large groups. Clark W. Nicholls [EMAIL PROTECTED] www.cwnicholls.com fax: 419-844-7564 (yes, 419 provided free by efax.com) phone: 413-243-3433 /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
