Rick- I drove 4 winters without those mounting pins, just the two bolts at the top of the windscreen and the ones at the back where the ragtop bar bolts down- no problem at all. Two hardtop seasons I didn't bother taking the ragtop frame off, just folded it down behind the roll bar, couldn't have done that with the ht pins on. BTW- its a factory steel hardtop, not the aftermarket fiberglass type, don't know if that makes a difference... I believe others do this too, right Jesse? *grin*
"Any drive you don't return from on a tow truck was a good one..." Jon '77 (mostly) 1500 "Ol' Yeller" FM66043 7U Nass #104 www.bigolbear.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:spitfires-owner@;autox.team.net]On Behalf Of Rick Gregory Sent: Tuesday, November 12, 2002 5:29 PM To: Spitfires Autox. Team. Net (E-mail) Subject: Hardware for hardtop Anyone know where the mounting hardware (rear sides) can be purchased for a 1500 Spitfire hardtop? I contacted Spitbits but they no longer have the short tie-down bars. Not even sure what else I need, I have never had the top on and I only have the two bolts at the front that come through the windscreen capping. Any info or suggestions would be appreciated very much - TIA! Rick Gregory '74 Triumph Spitfire FM15447UO '69 Austin Healey Sprite HAN9U81988G Great Falls, Montana http://www.spitfire.gregory.net /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
