ISTR from the dark recesses of more tan 30+ years of product knowledge that the factory fit fan moved the most air at around 2000 engine rpm. Any speed above or below 2k, the fan is basically doing nothing. An electric fan as pusher or puller will greatly improve matters as a whole. The blades are usually pitched to maximise airflow at maximum motor rpm and this is constant. Removing the engine driven fan when fitting an electric one will also release a nominal amount of extra bhp from reduced 'drag.' In conditions of high air temperature, I'd also fit a cooler thermostat. This last summer, both my Triumphs ran hotter than normal and while not in the danger area, it seemed a good idea to reverse flush both the radiator and block after having poured in a descaling solution. The filth that emerged on first drain had to be seen to be believed! While the UK isn't consistently hot, meaning I don't need an electric fan on either car, there's no doubt the simple exercise of internal cleaning contributed significantly to improved cooling.
Jonmac /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
