Chris Pappathopoulos wrote: > > Is there a source in the states for an accelerator cable that will work > with twin SU HS4s? Will a cable from an HS2 equipped car work, or is the > linkage different between the two setups? The cable on the car with the > Strombergs will not work becaase the cable sticks out too far past the > outer covering. > > Thank you, > Chris Pappathopoulos
Chris, My question would be, "What car equipped with HS2's used a cable. All the US ones had the rod that pushed the linkage between the carbs up from below. That being the case, I fabricated a bell linkage from drawings in the Haynes manual to create a place to mount a cable that was made for US 1500's (single ZS). I had to clip the end off the cable and install a different style of end so that I could adjust the cable. Joe /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
