Hi everyone here is the Easiest and fastest way i know to remove a ujoint. 1. Remove all the circlip 2. Spray the cups the u joint good with liquid wrench 3. wait a day for the liquid wrench to do its magic 4. find a good Bench Vise (or a GOOD C clamp 5. find a GOOD or Cheap socket that you are not to worried about that is big enough for the cups of the u joint to fit into. 6 Also find a socket that is slightly smaller than the cups. 7. now put the sockets on each side of the yoke and place the whole thing in the vise and start turning it. what should happen is 1 side gets pressed into the yoke further and the other side gets pressed into the socket and out of the yoke. (DO NOT PRESS THE CUP THAT IS BEING PRESSED INTO THE YOKE ALL THE WAY THROUGH THAT IS BAD) 8. after 7 is accomplished then you take a pair of vise grips and forcefully remove the cup that is now sticking out of the yoke. 9. now you should have one cup that is in your hand and one that is pressed into the yoke. 10. ok to get the other cup out find some thing that will fit over tha center part of the ujoint press the other cup into the big socket with the vise and remove that cup and now you should be able to just sile the u joint out of the yoke
PS. any Question as to how this is done just send me and Christine and Email. Oh yah i dont advice pounding on the rear wheel drive axles i bent a yoke on one and started driving and it busted up the u joint cups and i ended up in a 360 spin into the guaed rail with my first spit that i rebuilt which is now christine that some A**H*** pulled out in front of me without insurance.... __________________________________________________ Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
