>From the triumphspitfire.com web site. The swap was a physical bolt on. The Isuzu costs $72.99 (Autozone) with a life time warranty. You do have to change some wiring to bypass the original Starter Solenoid Wiring. Moved the original "solenoid to starter wire" to the upper lug on the Lucas solenoid and extended the original white/red "Ignition switch to Solenoid" wire to the solenoid on the new starter. Basically, I am using the old solenoid as a junction block.
According to an article I just read the Isuzu starter fits non-1500cc Midgets perfectly (with body mods). The factory starter for Midgets and Spits/GT6s are the same so the Isuzu starter should also fit. 1989 Isuzu Trooper II 2.6 liter part number 17155 (best fit but man no longer be available) or 16878 (larger body than 17155) 1989 Isuzu Trooper II 2.6 liter part # 17155 or 16878 Now, this was actually done on a GT6, but should work just fine on a Spitfire. Photo of this at http://www.triumphspitfire.com/images/starter.jpg ----------------------------------------------------- The information contained in this communication may be confidential, is intended only for the use of the recipient named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please re-send this communication to the sender and delete the original message and any copy of it from your computer system. Thank you. ----------------------------------------------------- <<<<GWIASIG 0.07>>>> /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
