In message <[EMAIL PROTECTED]>you wri te: >Ok, guys, my tach, gauges (gas and temp) and turn signals are not working. >First, it would come and go, now just mostly dead. Sometimes, they would >partially work until I apply brakes, the tach needle would just drop to >zero. > >So must be the voltage stabilizer behind the speedo right? I received the >new one and I tested it briefly. Didn't seem to make a difference. Will >try to install completely to test further. Anything else I need to check?
It sound more like a bad/loose ground connection somewhere. > > > >BTW, how do you guys take off the heater knobs? I don't seem to have an >allen wrench small enough to fit the bolt. I've got four or five sets, none >will fit!! You are right about the allen wrench and it is pretty small and not usually come with the standard set. I bought one separetly, but don't remember the size and cannot find it now, maybe someone on the list would know the size. Dave |\ | | | _______________________________________/\ /\ /\_____| \|_____| |____________ Dave Chu \/ \/ | /| | | Dept. of Elec. & Comp. Eng. |/ | | | Concordia University Voice:(514)848-3115 Fax:(514)848-2802 1455 de Maisonneuve W. H961 Email:[EMAIL PROTECTED] Montreal, Quebec, Canada H3G 1M8 http://www.ece.concordia.ca/~dave/addr.html ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
