I have one of my frames stripped and have run into some anomalies. I removed the sway bar from the '77 and the '73 and when I checked them out, to see which was in the best condition, I had one with the ends drilled off center. I chose the one with the ends drilled in the center but didn't keep track of which ends went with each sway bar. When I got around to cleaning the parts up, for paint and poly bushings, the ends had different widths. The poly bushings looked like they were made for the narrowest ends. I've not seen this mentioned before. The '77 frame has a cut out, at the exhaust downpipe. I thought this was a factory change, from the '73. Now I'm not sure. The A-frame bolt at that point, was cut shorter-hacksaw. The opposite A-frame had all the shims, for alignment. Now I've got to strip the '73 frame, to see if I can tell which is straighter. Anyone have any experience with this type of stuff?
Larry /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
