How is the pivot bearing of the pedal? The Spit clutch and brake pedals have a pressed-in bronze bushing that pivots on a short steel shaft that is held in the mounting bracket by snap rings. The shaft can get seized to the bushing, and then the shaft starts rotating in the mounting bracket, which it was not designed to do.
In any case, the bushings in the brake and clutch pedals need periodic lubrication. Doug Braun '72 Spit At 08:47 AM 9/16/2003 -0400, you wrote: >Since getting my car back on the road, I've noticed that the clutch pedal action >seems stiff and graunchy. And it is making a creaking noise. The master cylinder is >new a year or so ago, the slave is old. I've had the engine in and out lately - the >clutch was about 3 years old, maybe 10K miles. I lightly greased the splines and the >face of the throwout bearing when I put it back together, per Haynes. It feels like a >car with a bad clutch cable, but of course it is hydraulic. *** http://www.team.net/the-local *** *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
