GlacierMy recent gearbox rebuild on the 1980 Spitfire is not looking good. The car is on jackstands and in neutral when I start the car the driveshaft rotates. It stops when I press the clutch as it should and goes into all gears except 1st. In first gear the shifter feels that it is engaged but it grinds like the gears are just touching. When I put it in it looked fine. I also never got any answer for why a previously good Borg and Beck clutch with 500 miles now slips terribly. With the clutch engaged and brakes pressed, the clutch should not slip before 130 lbft of torque on the front harmonic balancer bolt. It slips at 70 lbft. No spring are broken and nothing is warped, whats going on here? The engine had gone to the machine shop for a partial rebuild but I am assured that the flywheel was not resurfaced. The engine rebuild is perfect. Zahid
[demime 0.99d.1 removed an attachment of type image/jpeg which had a name of image002.jpg] [demime 0.99d.1 removed an attachment of type image/jpeg which had a name of Glacier Bkgrd.jpg] *** http://www.team.net/the-local *** *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
