James
69 Signal Red Spit
Barry Schwartz wrote:
I am about ready to refinish the dash on the wife's Spitfire resto. I am leaning towards using contact cement(Scotch 90 high strength), but thought I would check to see if anybody has had any experience good or bad with using it, or possibly a suggestion for using something else if that isn't suitable. The dash will still have the original varnish (it won't be removed) but it will be sanded before applying the adhesive. I am adding an oil gauge to the center just because I believe there should have been one originally. It should look really nice when done. The real wood veneer is very thin, approx 1/32nd of an inch thick so I need something that won't bleed through - plus, anybody have a source for white transfer letters??? I used to be able many years ago to buy them but with the advent of computers, transfer type letters are practically obsolete. Barry Schwartz (San Diego)
*** http://www.team.net/the-local ***
Your messages not reaching the list? Check out http://www.team.net/posting.html
*** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
