I used a silicone spray on the bushing and then, with a bit of effort, pushed them in by hand.
Like Doug said, check the part # and make sure you are putting the right one in the hole. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, March 23, 2005 5:57 PM To: Doug Mitchell Cc: [email protected] Subject: Re: Rear Trunnions I assume that you are talking about the plastic trunnion bushings... I have found they could always be inserted by hand, but you had to push pretty hard. Possibly you got front and rear bushings mixed up? They are not the same part number. Doug Braun '72 Spit At 05:35 PM 3/23/2005 -0500, you wrote: *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
