Let's just hope the next set you need to install are slightly oversized like these. A better move might have been to sand down the bush to fit the properly sized metal work.
Paul Tegler [EMAIL PROTECTED] www.teglerizer.com ----- Original Message ----- From: "Doug Mitchell" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, March 31, 2005 6:25 PM Subject: Re: Rear Trunnions > Spitted Ones, > > An update to my question about the trunnions from last > week. I ordered a new Rear Trunnion Kit last weekm and > then proceeded to take my faithful Dremel tool (actually) > the Black & Decker version) and sand out the part on the > inner hub where it sits. I also disassembled the 'old new' > parts and absolutely destroyed them. After sanding them > down, and using a liberal application of anti-seize compound > I re-assembled everything. Boy, did they slide together > nicely. More like I remembered from 1976. Next step is to > replace the spring and then everything can go back together. *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
