The door seals are the last thing you want to put in right before the door panel. Take an old scraper and bend it into a "J" to hold the clip, that way you can pull up to install them. After the clips are in place support the clips with this tool and push the strips into the clips with a piece of wood. You will have to trim the strips to fit with a pair of tin snips.
Tod Jones Harrisonburg VA 67 Spit-6 Does anyone have a routine for stuffing the door guts back into the door. I would think the front and back channels would be the items to start on after the exterior handle, and the lock. Does one install the outer door waste and the inner weatherstrip after the glass is in place or wouild it be easier to do it before? Any ideas would be appreciated. Larry Ternowski *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
