Install the crank setup, then the channels, then drop the glass in to the very bottom of the channel NOT connected to the crank. Then install the seals. If you put the seals in first the glass will never go in. Then loosen the crank and connect the glass
Paul Tegler [EMAIL PROTECTED] www.teglerizer.com ----- Original Message ----- From: "Larry T" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, May 16, 2005 1:49 AM Subject: MK3 Door reassembly > Does anyone have a routine for stuffing the door guts back into the door. I > would think the front and back channels would be the items to start on after > the exterior handle, and the lock. Does one install the outer door waste and > the inner weatherstrip after the glass is in place or wouild it be easier to > do it before? Any ideas would be appreciated. > > Larry Ternowski *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
