Andy Mace Writes: > Forgive my correcting your terminology, but do you really mean bolts? > Usually, the spring is held to the diff. with nyloc nuts and flat washers on > studs. I don't know if it really makes all that much difference, but I've > never seen before what you describe, even on spring hold-downs where (GASP!) > the nylocs have been reused! >
Yes, they are actually studs with nyloc nuts and flat washers. Sorry for the misinformation. I reused the nylocs as they are still very tight. I had a bear of a time getting them off of the studs to clean up the studs. Vise-Grips are wonderful! -Kirk 68 Mk III Spit http://www.kirkanddonna.com/kirk/spitfire/ Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
