At 09:15 PM 3/7/2006 -0500, Greg Rowe wrote: >Now that I have my new, rust free spitfire, I would like to keep it that way. >(First thing, no more >driving on snowy days with the roads salted!) There is some very light >surface rust on the floor plans, top and bottom. I'm going to wire brush it >off, but for protection, should I paint POR15 >on both sides of the pan? Bottom only and use a good quality paint like >Rustoleum on top? Or >is POR15 overkill for a car that will usually only see dry weather?
I can't say which is best, but if you are working on the floorpans, inspect them carefully for cracks around the seat attachment points. Doug Braun '72 Spit Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
