Hi guys, I can't get the vertical link back on the car. Urgh! I had the rotoflexes replaced. Now I am tring to re-install the system.
I have the wishbone connected to the frame and virticle link. I have the tool holding the transverse leaf spring out but I am about an inch away from being able to get the top leaf spring bolt through the top of the verticle link and the spring. Any suggestions on what I am doing wrong? It came off pretty easy. It looks like I will have to force the rotoflex to flex in a major way to get the verticle link over far enough to get the bolt through the hole. Vroom (again one day), Scott 69 GT6+ 59 MGA 1500 60 "Mashed" Healey BN7 http://www.geocities.com/bgeuroclassics/BG_Euro.html --------------------------------- New Yahoo! Messenger with Voice. Call regular phones from your PC and save big. Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
