That's exactly what I need. I'm surprised that neither Spitbits, VB and TRF have that part.
Thanks! 1980 Triumph Spitfire "PJ" Savannah, Ga -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, April 26, 2006 2:34 PM To: [email protected] Subject: Re: Upper Bonnet Seal? My car has two small U-shaped "bumpers" which keep the bonnet from rubbing on the upper cowl bodywork. Of course, I can't find it in my TRF catalog now, which surprises me because I thought I bought replacements of these from TRF many years ago. But it's simple - picture a 2" length of rubber fuel hose with a slit cut down the length. Press over the lip of the bonnet and Voila! You have yourself a little bumper. My car has only two, one at each outer end of the lip. Does that help at all?? -- George P. NASS #290 '78 Spit 1500 Ruther Glen, VA Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
