Please help, I have trouble with my ford taurus
I have no heat in the car.
I performed the following work:
- flushed the colling system with a garden hose
- replaced the themostat
- confirmed the heater fan works at all speeds
- flushed the heater core with: liquid plumber, the works, oven off and CLR
- the colant hoses form my engine spit in a T, on side for A/C running and
the other for heater running
- the A/C hoese are really hot when I run the car witht he heat on, but
the heater hoses are hot, but not as much,
- i suspect the heater core valve may be stuck closed or the heater core may
still be plugged (although i can pump water through it).
- i am planning on putting clear hoses on after the heater core and watching
colored pieces of plastic to see if collant is circulating thru the heater
core
- am also going to ty this stuff from auto zone
http://www.evapo-rust.com
any ideas?
john
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== Help keep Team.Net on the air
=== http://www.team.net/donate.html
=== unsubscribe/change address requests to [EMAIL PROTECTED] or try
=== http://www.team.net/cgi-bin/majorcool
=== Other lists available at
=== http://www.team.net/mailman/listinfo
=== Archives at http://www.team.net/archive
=== http://www.team.net/the-local
=== Edit your replies!
