Grant, Have you pulled the sender out of the tank. The floats will leak over time and cause the reading to be off. My float is 1/4 full of gas and I'm just waiting for needing other parts to place an order.
Make sure to wait till you have less than 1/2 a tank of gas before removing the sender. Bob Berger 78 Spitfire > From: Grant Buss <[EMAIL PROTECTED]> > Date: Sun, 1 Jul 2007 10:16:38 -0400 > To: spitfires-list <spitfires@autox.team.net> > Subject: [Spits] Gas guage > > Morning everyone > I have a slight problem with my gas gauge. It reads a 1/4 tank off. When it > shows 1/4 tank it is really 1/2 tank. My Temp gauge appears to be OK. I don't > think there is anything wrong inside the tank. I think the voltage at the > gauge should be 10 volts. How do you test it? > Thanks to everyone Grant > _______________________________________________ > Spitfires mailing list > Spitfires@autox.team.net > http://autox.team.net/mailman/listinfo/spitfires _______________________________________________ Spitfires mailing list Spitfires@autox.team.net http://autox.team.net/mailman/listinfo/spitfires