I'm trying to start my project engine, but I have no spark at the plugs. I have full voltage at battery. With ignition key turned to run position, there are 12 volts at the coil.
I've tried two coils, and get the same response: which is one spark when I first turn the key to Start, then no more sparks. Any suggestions? I'm at the point where I might try an electronic ignition dizzy, because this points version has got me beat. Other pertinent info is that this is a 76 1500, newly rebuilt, and this is the first start. Would this be the symptom if I had the timing gear out by 180 degrees? Might it be a bad condenser? Should I try rotating the plug wires on the dizzy? (ie. Move #1 to where #3 was located, and 3 to where 4 was, etc) Many Thanks Nick Moseley, NASS #278, 76-81 Spits, GT 6, Metro Vancouver B.C. _______________________________________________ Support Team.Net http://www.team.net/donate.html [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
