I have a PVC one in my red Spit and it fits and works well. I insulated the underneath by spraying Urethane foam (from an aerosol can purchased at Home Depot). That works well and can be trimmed with an electric knife (Just don't tell the wife).
Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Muller Sent: Saturday, October 17, 2009 5:38 PM To: [email protected]; Spitfire list Subject: [Spits] plastic tranny covers I have plastic tranny covers in both the Spitfire and GT6. IIRC, they came from different sources (Spitbits, TRF) but I may be mistaken. As far as I noticed they are the same. They've been in the cars for more than a few years. Neither fit particuarly well, okay but not great for several reasons. The GT6 cover is now slightly cracked in one spot. And driving through severe rain and puddles for the CCBCC British Legends ride taught me the value of having a better fit to the firewall! So I'm considering fitting another and doing it more carefully. Any thoughts or experiences with them? Is any vendor's better than another or are they all really the same from the same manufacturer? Tanks, Jim Muller [email protected] You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive _______________________________________________ Support Team.Net http://www.team.net/donate.html You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
