You may have t resort to using a torch to burn the rubber away and knock the outer steel sleeve out using a cold chisel.
Joe ---- Roger Elliott <[email protected]> wrote: > Hi, > > I am still working on my differential and leaf spring. I am trying to > replace the mounting bushings on both, but cannot get them out. > > They are the ones with a external metal sleeve, rubber then an internal > metal sleeve. Both the differential and spring are out of the car. > > On the spring I have tried using a bolt - socket that that bushing will > fit into - bushing - socket about the same size as the bushing then a > nut and tightening it. I didn't get anywhere. I don't have a socket > large enough for the differential bushing to slide into. > > Any suggestions on how to get them out? > > Thanks, > Roger > _______________________________________________ > > Support Team.Net http://www.team.net/donate.html > > You are subscribed as [email protected] > > [email protected] > http://autox.team.net/mailman/listinfo/spitfires > > http://www.team.net/archive _______________________________________________ Support Team.Net http://www.team.net/donate.html You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
