I'm looking for the steel brake lines, specifically for the GT6+ (for those who need numbers, 309710 and 11), that run from the rear flex hose to the slave cylinder. For those of you in the know,they are bent like a pretzel to clear the upright, Rotoflex etc. As many of the parts specific to the GT6+ are made of unobtainium, as these appear to be, I was wondering if possibly the TR6 rear lines could be used. If the length is right I could bend them to suit my application. What I need is a line that is 13 and 1/2 inches long (measured straight), with a long male 3/8 flare fitting at one end, to mate with the slave cylinder, and a 3/8ths female flare nut, to mate with the flex hose at the other. It appears that the TR6 uses something similar at the rear but I do not have on hand any to measure it. I "could" probably flare my own, but I would rather have them already done as bending the line would be relatively easy - and I hate to order one just to find out it won't work - Anybody have a TR6 rear one the bench, or in their spare parts box that they could measure?
Barry - -------------------------------------------------------------------- mail2web.com Enhanced email for the mobile individual based on Microsoft. Exchange - http://link.mail2web.com/Personal/EnhancedEmail _______________________________________________ [email protected] Donate: http://www.team.net/donate.html Suggested annual donation $11.47 Archive: http://www.team.net/archive Forums: http://www.team.net/forums Unsubscribe/Manage: http://autox.team.net/mailman/options/spitfires/[email protected]
