I can't help much since I've done this on a 95 and that�s a bit different from your car. Just be patient though and search around all the edges of the piece you want to remove. Sometimes you have to remove a different piece to get to the one you want.
Try looking on the Net for a how-to on what gauge faces install. I know you not installing gauge faces but it should help in taking the dash apart. Also if you don't have a Chiltons or Haynes manual yet go get one. They both have some OK pictures of all the dash pieces that should help at least a little bit. - Cris On 5/26/02 1:34 PM, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> wrote: > i need help!!! i'm so frustrated right now...i'm trying to get my car ready > to paint some accents INSIDE. i've pulled the top cover of the "thing" right > behind the steering wheel...where my hazard light button comes out of...so i > can get to the plastic molding that lines the plastic in front of my > guages...make sense??? i can't get that plastic thing off and can't tell > where the hell it's fastened...so then i decided i would pull the handles out > of the door...the ones that you used to pull the door shut...can't get those > bastards off either...then i decide i'll pull the plastic that goes around my > instrument panel (stereo, heater/a/c controls, and fog lamp and rear defrost > buttons) i can't tell where that damn thing is fastened either...i couldn't > see any screws but did see two little (what looks like) plastic fasteners on > either side of it but don't want to try to force those off if that's not what > they're made for...some please please PLEASE help me... > > alison > > > SPOC NE web site: http://www.spocne.org > SPOC NE web site: http://www.spocne.org
