Please find few comments on this draft
1. Section 3.1.1 , below must be Ref2 Ref1: Hardware (microcode) just punts the packet. Software (slow path) implements the required OAM mechanism. Timestamp is not carried in the packet forwarded to the next hop. 1. 4.1.2.2, here it must be N2 (page 10) If the target SID is not locally programmed, N4 responses with the ICMPv6 message (Type: "SRv6 OAM (TBA)", Code: "SID not locally implemented (TBA)"); otherwise a success is returned. 1. 4.1.2.2, here it must be B:4:C52 (page 11) The ICMPv6 process at node N4 checks if its local SID (B:2:C31) is locally programmed or not and responds to the ICMPv6 Echo Request. 1. 4.3.2.2, here it must be B:4:C52 (page 16) The traceroute process at node N4 checks if its local SID (B:2:C31) is locally programmed. 5) in below two cases is it B5:: or it must be A:5:: ? > ping A:5:: via segment-list B:2:C31, B:4:C52 Sending 5, 100-byte ICMP Echos to B5::, timeout is 2 seconds: !!!!! > traceroute A:5:: via segment-list B:2:C31, B:4:C52 Tracing the route to B5:: Thanks Rajesh Juniper Internal
_______________________________________________ spring mailing list [email protected] https://www.ietf.org/mailman/listinfo/spring
