I agree with this.

The experience in NVO3 was that picking one data plane solution to take forward 
on the standards track allowed the WG to focus on that solution, as well as 
control plane and OAM mechanisms required to support it. It also gave a clear 
indication to the industry.

Regards

Matthew

From: spring <[email protected]> on behalf of "Aissaoui, Mustapha (Nokia 
- CA/Ottawa)" <[email protected]>
Date: Tuesday, 27 July 2021 at 15:12
To: "Rabadan, Jorge (Nokia - US/Mountain View)" <[email protected]>, 
"Henderickx, Wim (Nokia - BE/Antwerp)" <[email protected]>, 
"[email protected]" <[email protected]>
Subject: Re: [spring] SRv6 compression

Same here. We want a single standard method of SID compression to allow the WG 
to focus on finalizing it and get vendors hardware implementations updated.

Regards,
Mustapha.

From: spring <[email protected]> On Behalf Of Rabadan, Jorge (Nokia - 
US/Mountain View)
Sent: Tuesday, July 27, 2021 4:54 AM
To: Henderickx, Wim (Nokia - BE/Antwerp) <[email protected]>; 
[email protected]
Subject: Re: [spring] SRv6 compression

I agree with Wim’s statement that the precedent in NVO3 *could* apply here too: 
pick one solution as Standard’s track RFC, and once it is done, the others 
might be documented as Informational RFCs if they have implementations.

That would help the industry to move forward.

Thanks.
Jorge


From: spring <[email protected]<mailto:[email protected]>> on 
behalf of Henderickx, Wim (Nokia - BE/Antwerp) 
<[email protected]<mailto:[email protected]>>
Date: Tuesday, July 27, 2021 at 9:11 AM
To: [email protected]<mailto:[email protected]> 
<[email protected]<mailto:[email protected]>>
Subject: [spring] SRv6 compression
Given the design team accomplished the work on providing requirements and 
analysis to compress an SRv6 SID list, I would recommend we pick 1 solution 
similar to what was done in NVO3 (when we discussed GENEVE, GUE, GPE, etc) 
given this has to be implemented in HW..

I hope we can conclude on this asap and move forward on this topic

_______________________________________________
spring mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/spring

Reply via email to