http://earthquake.usgs.gov/regional/states/top_states.php
Just take a look at the USGS site and you'll see if yours is one of the top
20 states with earthquakes of 3.5 or greater. Everyone expects to see AK, CA
and HI but youall from TX or IL or UT, NV or even Maine might be surprised.
Shake rattle and roll!
Thom McMahon
Firetech, Inc.
2560 Copper Ridge Dr
Steamboat Springs, CO 80488-2136
Tel: 970-879-7952
Fax: 970-879-7926
----- Original Message -----
From: "Kathryn Tyler" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Wednesday, February 28, 2007 2:05 PM
Subject: RE: Building expansion joints
When the building calls out that it has a structural expansion joint we do
nothing but if it calls out for a seismic expansion joint I spec and also
design in a Metra-flex loop. We do it here with all three trades, Fire,
HVAC and Plumbing).
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ed Kramer
Sent: Wednesday, February 28, 2007 1:26 PM
To: [email protected]
Subject: Building expansion joints
Common for larger buildings to have structural expansion joints. Rarely
(actually, never) have I seen an architectural/engineering plan call for
anything special when crossing them (plumbing, HVAC or sprinkler).
Is this something to be concerned about, or should I move on to something
else?
Ed Kramer
Littleton, CO
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
