Hello Paul,

Thank You

Tuesday, May 15, 2007, 10:03:17 AM, you wrote:

> So what you really have is just simple obstructed construction.  Place
> the deflector 1" below the bottom flange of the beam and space them
> normally. 

> Paul J. Pinigis, P.E.
> Chief Life Safety Engineer

> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Charles
> Thurston
> Sent: Tuesday, May 15, 2007 9:57 AM
> To: Paul Pinigis
> Subject: Re[2]: Pockets or just plain Obstructions

> Hello Paul,

> Got my coffee and construction calculator working now and it looks
> like 113.5556 cubic feet

> Tuesday, May 15, 2007, 8:44:52 AM, you wrote:

>> Check your math, but first convert 14" to 1.167'.

>> Paul J. Pinigis, P.E.
>> Chief Life Safety Engineer

>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of Coastal
>> Sent: Tuesday, May 15, 2007 8:40 AM
>> To: [email protected]
>> Subject: Pockets or just plain Obstructions

>> Hello sprinklerforum,

>>   I have a 2 story butler building where the center area of the 2nd
>> floor is supported by 14" deep steel beams exposed to the floor below.
>> The space between the beams are 24'-4" long x 4' Wide and the beams
> are
>> 14" deep supported at each end by a 16" deep beam. IF I did my math
>> right that figures to 1362.666 cubic feet in each space. Heads down
> the
>> length of each space?  Sidewall head at each end in each space? This
> is
>> a light hazard building. The space under these beams will be a game
> room
>> for a Youth Christian Center. I am open to suggestions to protect this
>> area AND keep the pool cues away from the sprinkler heads......







-- 
Best regards,
 Charles                            mailto:[EMAIL PROTECTED]

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to