Hello Roland,

The only time I looked for a MSDS Sheet was on the inside of the
bottom of the bottle....  THEN I started learning Sprinkler Design and
switched to hard liquor.....  Those bottles do not have em on the
inside of the bottom either...

Tuesday, May 29, 2007, 10:21:10 AM, you wrote:

> I would question whether the alcohol content was high enough to be an
> issue.  If this were storage (in order to sidestep the mercantile  
> issue), what commodity would plastic bottles with wine be?  Liquor  
> (less than 100 proof) in a plastic or glass bottle is a class IV  
> whereas noncombustible liquids in a plastic bottle is a class I.   
> Liquor by definition is a distilled verses a fermented beverage. It  
> has a much higher alcohol content (starting around 30%) whereas a  
> white is typically around 8% and a better red can be 14%.  Must  
> confess I have never looked for an MSDS sheet on wine - lol.

> Roland

> On May 25, 2007, at 3:04 PM, A.P.Silva wrote:

>> Thanks, that's my feeling too, but thought wouldn't hurt to ask the  
>> forum.
>> The reason for asking was most bottles nowadays are plastic, and if  
>> they
>> break due to a fire, the alcohol could contribute to the fuel load  
>> more than
>> clothing and jewelry.
>>
>> Tony
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of Todd  
>> Williams
>> - work
>> Sent: May 25, 2007 3:31 PM
>> To: [email protected]
>> Subject: Re: Wine store
>>
>> I would still be classified as retail, even though is it probably
>> less hazardous than a clothing store in a mall, which would also be
>> OH2. I asked a similar question re a jewelry store a while back and
>> got my proverbial butt handed to me.
>>
>>
>> At 05:19 PM 5/25/2007, you wrote:
>>>
>>> Would a wine store be OH 2? Anyone done one lately or recollect  
>>> from the
>>> past?
>>>
>>> Tony
>>>
>>> _______________________________________________
>>> Sprinklerforum mailing list
>>> [email protected]
>>> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>>>
>>> To Unsubscribe, send an email to:Sprinklerforum- 
>>> [EMAIL PROTECTED]
>>> (Put the word unsubscribe in the subject field)
>>
>> Todd G. Williams, PE
>> Fire Protection Design/Consulting
>> Stonington, Connecticut
>> 860-535-2080
>> www.fpdc.com
>>
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>>
>> To Unsubscribe, send an email to:Sprinklerforum- 
>> [EMAIL PROTECTED]
>> (Put the word unsubscribe in the subject field)
>>
>> _______________________________________________
>> Sprinklerforum mailing list
>> [email protected]
>> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
>>
>> To Unsubscribe, send an email to:Sprinklerforum- 
>> [EMAIL PROTECTED]
>> (Put the word unsubscribe in the subject field)
>>

> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

> To Unsubscribe, send an email
> to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)


-- 
Best regards,
 Charles                            mailto:[EMAIL PROTECTED]

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to