Look at the Vic 705W Butterfly valve. I just checked the datasheet. It will monitor in the fully open or closed position.
Joe Burtell, SET, CFPS Burtell Fire Protection, Inc. [EMAIL PROTECTED] www.burtellfire.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Wisneski Sent: Friday, October 19, 2007 11:01 AM To: [email protected] Subject: RE: Fire Pump Test Header Valve Supervision John, I went through the same exercise last month. The only luck I had was with Ferguson Fire & Fab out of Tucker, GA. They have a company that will alter a butterfly tamper to work correctly with a fire pump test header. Contact Jim Sutton. Mike Wisneski -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Drucker Sent: Friday, October 19, 2007 11:13 AM To: [email protected] Subject: Fire Pump Test Header Valve Supervision Does anyone have product reference for a tamper switch and or tamper switch/valve assembly configured for use on a fire pump test header aside from pull type (PTS) cable devices ?. Thanks John Drucker _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.488 / Virus Database: 269.15.1/1079 - Release Date: 10/19/2007 5:10 AM _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
